ESTIMATING FLAW SIZE IN PRESSURE VESSEL WELDS.

被引：0
|
作者：
Meyer, Hans-Jurgen
机构：
来源：
Welding Design and Fabrication | 1977年 / 50卷 / 11期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
In practice, standard reference flaws in calibration blocks serve as a base of comparison for real flaws. These calibration blocks are of various thicknesses and contain reflectors of known size and orientation. The distance between the reflectors is known. Engineers have run tests to conform to ASME Section V and to West German specification HP5/3. The HP standard is the more severe, if echo amplitude is the only consideration.
引用
收藏
页码：78 / 81
相关论文
共 50 条
  • [1] Mechanized Ultrasonic Testing of Pressure Vessel Welds.
    Schluckebier
    ZIS Mitteilungen, 1976, 18 (08): : 817 - 821
  • [2] Cassini mission to saturn relies on flaw-free GTA welds.
    FrancoFerreira, EA
    George, TG
    WELDING JOURNAL, 1996, 75 (04) : 69 - 75
  • [3] FLAW SIZE ACCEPTANCE LIMITS FOR A STAINLESS STEEL PRESSURE VESSEL
    Guzman-Leong, Consuelo E.
    Gosselin, Stephen R.
    Simonen, Frederic A.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 6A: MATERIALS AND FABRICATION, 2014,
  • [4] MODEL OF THE FLAW SIZE DISTRIBUTION IN WELDS
    SCHMITT, W
    WELLEIN, R
    NUCLEAR ENGINEERING AND DESIGN, 1982, 71 (03) : 293 - 294
  • [5] Failure of Welds.
    Kurz, Richard
    Schweissen und Schneiden/Welding and Cutting, 1973, 25 (02): : 48 - 52
  • [6] Loading of Plug Welds.
    Moebius, W.
    Seyffarth, W.
    Mueller, H.
    Schweisstechnik Berlin, 1983, 33 (09): : 401 - 404
  • [7] SPECIFICATIONS AND EXAMINATION OF WELDS.
    Watkinson, F.
    South African Mechanical Engineer, 1976, 26 (11): : 470 - 481
  • [8] Lamellar Tearing in Welds.
    Koch, Helmut
    Schweisstechnik (Vienna), 1974, 28 (06): : 125 - 126
  • [9] ANALYSIS OF DEFECTS IN WELDS.
    Bartholome, G.
    Vasoukis, G.
    American Society of Mechanical Engineers (Paper), 1975, (75 -PVP-14 for meet):
  • [10] Internal Stresses in Welds.
    Rappe, Hans Achim
    Schweissen und Schneiden/Welding and Cutting, 1974, 26 (02): : 45 - 50
12345