Installation of the world's first 500-kV XLPE cable with intermediate joints

被引：0

作者：

Suzuki, Akira ^{[1
]}

Nakamura, Shin'ji ^{[1
]}

Matsuda, Moriaki ^{[1
]}

Tanaka, Hiroshi ^{[1
]}

Shiomitsu, Masaaki ^{[1
]}

Hiraga, Kiyoaki ^{[1
]}

Adachi, Kiyomi ^{[1
]}

Hiratsuka, Katsuyoshi ^{[1
]}

Matsuda, Kazuhiko ^{[1
]}

Yagi, Masashi ^{[1
]}

Sudo, Akihisa ^{[1
]}

Sugawara, Kimiji ^{[1
]}

机构：

[1] Tokyo Electric Power Co, Inc, Tokyo, Japan

来源：

| 2000年 / Furukawa Electr Co Ltd, Japan卷

关键词：

Cable jointing - Electric power distribution - Extrusion molding;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Tokyo Electric Power's Kazunogawa Power Station will, when completed, be Japan's largest pumped-storage hydroelectric power station, with an output of 1.6 GW. The first phase is currently under construction, with two 400-MW machines and one cable circuit. Using leading-edge technology Furukawa Electric has provided 500-kV XLPE cable and associated extrusion-molded joints (EMJs) and horizontal gas-immersed sealing ends (EBGs) for the No. 1 and No. 2 machines. Construction was completed in November 1998 and voltage withstand tests have also been performed. The cable for this line is 2300 m in length, longer than has ever been used in a power station interconnect. Because of transportation constraints, insulation-type EMJs are installed at intermediate points. The line is being built under the same basic design concept and installation conditions as the Shin-Keiyo-Toyosu Line now under construction, and reflects the expertise and knowhow acquired there. The equipment covered here is scheduled to go into service in December, 1999.

引用

共 50 条

[1] The world's first long-distance 500-kV XLPE cable line, Part 1: Cable and cable installation
Ohki, Y
Yasufuku, S
IEEE ELECTRICAL INSULATION MAGAZINE, 2002, 18 (02) : 65 - 66
[2] Development of a 500-kV DC XLPE cable system
Maruyama, Satoru
Ishii, Noboru
Shimada, Michihiro
Kojima, Shinji
Tanaka, Hideo
Asano, Mitsumasa
Yamanaka, Tetsuya
Kawakami, Shin'ichi
Furukawa Review, 2004, (25): : 47 - 52
[3] The world's first long-distance 500kV-XLPE cable line, part 2: Joints and after-installation test
Ohki, Y
Yasufuku, S
IEEE ELECTRICAL INSULATION MAGAZINE, 2002, 18 (03) : 57 - 58
[4] Installation of the first 400 kV XLPE cable in Berlin
Mod Power Syst, 3 (47):
[5] Development of 500-kV XLPE cables
Kaminaga, K
Ichihara, M
Jinno, M
Tanabe, T
Fukunaga, S
Kanaoka, M
Takehana, H
ELECTRICAL ENGINEERING IN JAPAN, 1997, 118 (01) : 28 - 40
[6] Development of 500-kV XLPE cables
Kaminaga, Kenji
Ichihara, Masaki
Jinno, Mitsuo
Tanabe, Teruyoshi
Fukunaga, Sadao
Kanaoka, Mamoru
Takehana, Hajime
1997, (118):
[7] Completion of the Shin-Toyosu Line using a 500-kV XLPE cable line
Yonemoto, N.
Takeda, N.
Ohya, S.
Mitani, M.
Narisada, S.
Mizunami, K.
Kubota, T.
Yamashita, M.
Kishi, K.
Nishikawa, S.
SEI Technical Review, 2001, (52): : 20 - 31
[8] Development of 500-kV XLPE cables and accessories for long-distance underground transmission lines .5. Long-term performance for 500-kV XLPE cables and joints
Kaminaga, K
Ichihara, M
Jinno, M
Fujii, O
Fukunaga, S
Kobayashi, M
Watanabe, K
IEEE TRANSACTIONS ON POWER DELIVERY, 1996, 11 (03) : 1185 - 1194
[9] DEVELOPMENT OF 275 KV XLPE CABLE SYSTEM AND PROSPECT OF 500 KV XLPE CABLE
TAKAOKA, M
ONO, M
KAJI, I
IEEE TRANSACTIONS ON POWER APPARATUS AND SYSTEMS, 1983, 102 (09): : 3254 - 3263
[10] Development of 500-kV XLPE cables and accessories for long-distance underground transmission lines .4. Electrical properties of 500-kV extrusion molded joints
Takeda, N
Izumi, S
Asari, K
Nakatani, A
Noda, H
Yamaguchi, M
Tan, M
IEEE TRANSACTIONS ON POWER DELIVERY, 1996, 11 (02) : 635 - 643

← 1 2 3 4 5 →