INVESTIGATION ABOUT PREVENTION OF TOOTH PROFILE CHANGE OF NYLON GEARS. (3RD REPORT; WEAR AND TOOTH PROFILE CHANGE IN PROFILE SHIFTED NYLON GEAR).

被引：0

作者：

Tsukamoto, Naohisa ^{[1
]}

Maruyama, Hiroki ^{[1
]}

Shi, Jiasun ^{[1
]}

机构：

[1] Chiba Inst of Technology, Narashino, Jpn, Chiba Inst of Technology, Narashino, Jpn

来源：

Bulletin of the JSME | 1986年 / 29卷 / 252期

关键词：

GEAR MANUFACTURE - Plastics Applications - LUBRICATION - WEAR OF MATERIALS;

D O I：

10.1299/jsme1958.29.1927

中图分类号：

学科分类号：

摘要：

Two prevention methods are proposed in the previous report as the prevention methods of tooth profile change in the course of operation of a nylon gear which transmits the power. And their effect is confirmed by experiments. In this report as a method simpler than those methods, a plus profile shifting of nylon gear is proposed. In the plus profile shifted gear, the tooth thickness of tooth flank increases and the tooth is less liable to deflect. Meanwhile the sliding of tooth is large. In this report the abrasion of tooth of nylon gear is investigated under several profile modification coefficients and this method is examined to see how useful it is as the prevention method of tooth profile change.

引用

页码：1927 / 1933

共 16 条

[1] INVESTIGATION ABOUT PREVENTION OF TOOTH PROFILE CHANGE OF NYLON GEARS .3. WEAR AND TOOTH PROFILE CHANGE IN PROFILE SHIFTED NYLON GEAR
TSUKAMOTO, N
MARUYAMA, H
SHI, J
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1986, 29 (252): : 1927 - 1933
[2] INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS (2ND REPORT; ABRASION AND TOOTH PROFILE CHANGE OF NYLON GEAR, REINFORCED WITH A STIFFENER).
Tsukamoto, Naohisa
Terashima, Kenichi
Bulletin of the JSME, 1985, 28 (245): : 2723 - 2729
[3] ABRASION AND TOOTH PROFILE CHANGE OF NYLON GEARS, REINFORCED WITH A STIFFENER .2. INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS
TSUKAMOTO, N
TERASHIMA, K
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (245): : 2723 - 2729
[4] INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS .1. AMOUNT OF PROFILE MODIFICATION OF STEEL GEAR, WHICH MESHED WITH NYLON GEAR
TSUKAMOTO, N
SHI, J
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1985, 28 (240): : 1263 - 1270
[5] INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS (1ST REPORT; AMOUNT OF PROFILE MODIFICATION OF STEEL GEAR, WHICH MESHED WITH NYLON GEAR).
Tsukamoto, Naohisa
Shi, Jiasun
1600, (28):
[6] INVESTIGATION ABOUT THE STRENGTH OF PLASTIC GEARS .4. ABRASION AND STATE OF TOOTH PROFILE CHANGE OF DRIVEN NYLON GEAR
TSUKAMOTO, N
BULLETIN OF THE JSME-JAPAN SOCIETY OF MECHANICAL ENGINEERS, 1983, 26 (219): : 1661 - 1669
[7] INVESTIGATION ABOUT THE PREVENTION OF TOOTH PROFILE CHANGE OF PLASTIC GEARS (4TH REPORT, PREVENTING IN TOOTH PROFILE CHANGE BY PLASTIC GEAR MADE FROM LOW FRICTION COEFFICIENT MATERIALS).
Tsukamoto, Naohisa
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1986, 52 (481): : 2491 - 2496
[8] Non-contact measurement of a gear (3rd report). Rapid measurement of the tooth profile
Okuyama, Eiki
Kiyono, Satoshi
Moritoki, Hitoshi
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1993, 59 (10): : 1649 - 1654
[9] IMPROVEMENT OF GEAR ACCURACY IN GEAR HOBBING (3RD REPORT, RELATION BETWEEN THE GEOMETRICAL AND SETTING ERRORS OF HOB AND THE TOOTH PROFILE ERRORS OF GEAR).
Chiu, Hua
Ariura, Yasutsune
Umezaki, Yoji
Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (493): : 1996 - 1999
[10] IMPROVEMENT OF GEAR ACCURACY IN GEAR HOBBING: (2ND REPORT, INVESTIGATION OF THE CAUSES OF TOOTH PROFILE ERRORS BY COMPARING TOOTH PROFILE ERRORS WITH MEASURED ONES).
Ariura, Yasutsune
Chiu, Hua
Umezaki, Yoji
JSME International Journal, 1987, 30 (259) : 168 - 174

← 1 2 →