Effect of Postweld Heat Treatments on the Hardness and Microstructure of 17% Cr Ferritic Stainless Steels.

被引：0

作者：

Resende de Castro, Ana Luiza ^{[1
]}

Mirra de Paula e Silva, Evandro ^{[1
]}

Modenesi, Paulo Jose ^{[1
]}

机构：

[1] PUC, Braz, PUC, Braz

来源：

Metalurgia ABM | 1986年 / 42卷 / 346期

关键词：

STAINLESS STEEL - Weldability - WELDING - Stainless Steel;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Poor weldability is the main obstacle that prevents greater utilization of 17% chromium ferritic stainless steels. As far as the mechanical properties are concerned, the welds of this steel are characterized by low toughness and ductility. In the present paper the effect of postweld heat treatments on the microstructure and hardness of AISI 430 steels was studied. Alloys with addition of niobium and titanium were also investigated. The TIG process without filler metal was employed in welding the materials. Postweld heat treatments consisted of isothermal annealing in the temperature range 250 to 900 degree C for 30 min, followed by air cooling. No sensitive changes in microstructure were observed after the postweld heat treatments. The changes in hardness were more remarkable.

引用

页码：645 / 647

共 50 条

[1] EFFECT OF POSTWELD HEAT TREATMENT ON CREEP EMBRITTLEMENT OF Cr-Mo STEELS.
Takamatsu, Toshio
Otoguro, Yasuo
Shiotsuka, Kazuhide
Hashimoto, Katsukuni
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1981, 67 (06): : 774 - 783
[2] NEW FERRITIC STAINLESS STEELS.
Jackson, R.
BHP Technical Bulletin (Broken Hill Proprietary), 1976, 20 (01): : 37 - 38
[3] EFFECT OF MICROALLOYING ON THE alpha prime PHASE EMBRITTLEMENT IN 25% Cr FERRITIC STAINLESS STEELS.
Wu Haoquan
Kang T'ieh/Iron and Steel (Peking), 1986, 21 (10): : 53 - 56
[4] TEXTURES AND PRECIPITATES IN A 17%Cr FERRITIC STAINLESS STEELS
Gao Fei
Liu Zhenyu
Zhang Weina
Liu Haitao
Sun Guangting
Wang Guodong
ACTA METALLURGICA SINICA, 2012, 48 (10) : 1166 - 1174
[5] RELATION BETWEEN INTERGRANULAR CORROSION SUSCEPTIBILITY AND PRECIPITATION OF CARBIDES AND NITRIDES IN 17% Cr FERRITIC STAINLESS STEELS.
Takeda, Motohiko
Yoshioka, Keiichi
Ono, Yutaka
Ohashi, Nobuo
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan, 1977, 63 (05): : 622 - 630
[6] Effect of Solution Nitriding on Microstructure and Hardness in 12%Cr Martensitic Stainless Steels
Ngo, Huynh Kinh Luan
Nakashima, Koichi
Tsuchiyama, Toshihiro
Takaki, Setsuo
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2012, 98 (01): : A25 - A31
[7] MANUAL WELDING OF MARTENSITIC AND FERRITIC STAINLESS STEELS.
Troyer, Wade E.
Plant Engineering (Barrington, Illinois), 1976, 30 (06): : 155 - 158
[8] PROPERTIES OF DUPLEX AUSTENITIC FERRITIC STAINLESS STEELS.
Matthews, M.J.
Metallurgist and materials technologist, 1982, 14 (05): : 205 - 210
[9] Effect of Postweld Heat Treatment on Microstructure and Properties of Thick S11306 Ferritic Stainless Welded Joints
Hu, Xiaodong
Ma, Qingshan
Yang, Yang
Xu, Zhisheng
Li, Yule
METALS, 2023, 13 (01)
[10] FRACTURE CHARACTERISTICS OF 475 degree C EMBRITTLED 30%CR FERRITIC STAINLESS STEELS.
Yasunaka, Takashi
Kanao, Masao
1979, 19 (02): : 69 - 75

← 1 2 3 4 5 →