Process development for composite electric bus body using resin transfer molding technology

被引：0

作者：

Sheu, Ming-Fa ^{[1
]}

Lin, Yung-Kun ^{[1
]}

Chuang, Yu-Hwey ^{[1
]}

Chang, Yuan-Chang ^{[1
]}

Ong, Ching-Long ^{[1
]}

机构：

[1] Aeronautical Research Lab, Taichung, Taiwan

来源：

International SAMPE Symposium and Exhibition (Proceedings) | 2000年 / 45卷

关键词：

Adhesive joints - Bolts - Bonding - Buses - Composite structures - Preforming - Process control - Transfer molding - Vinyl resins;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

For electric buses, weight saving is a very important consideration for the performance improvement. In this study, the vacuum-assisted resin transfer molding processes to fabricate composite bus body were developed to substitute metal parts. In this process, various fibers and PU foams were selected to build the preforms of the vehicle bodies. The vinylester resin was used to fill the void volume of the preforms by vacuum-assisted resin transfer molding. Five finished body panels were assembled with bolt and adhesive bonding. The weight saving of the composite body is 30% with respect to the metal one.

引用

共 50 条

[1] The process development for composite electric bus body using resin transfer molding technology
Shau, MF
Lin, YK
Chuang, YH
Chang, YC
Ong, CL
BRIDGING THE CENTURIES WITH SAMPE'S MATERIALS AND PROCESSES TECHNOLOGY, VOL 45, BOOKS 1 AND 2, 2000, : 2332 - 2343
[2] Development of Manufacturing Technology for Cab Front Using Resin Transfer Molding Process
Pandiyan, K. Raghu Raja
Kundu, Gautam
Neogi, Swati
Patel, Jiten
JOURNAL OF COMPOSITE MATERIALS, 2010, 44 (18) : 2217 - 2231
[3] Development of Resin Transfer Molding Process Using Scaling Down Strategy
Kuppusamy, Raghu Raja Pandiyan
Neogi, Swati
POLYMER COMPOSITES, 2014, 35 (09) : 1683 - 1689
[4] Control method and technology of resin injection for resin transfer molding in manufacturing of composite materials
Zhang G.
Zhang C.
Shi X.
Wang Z.
Jiang Q.
Fangzhi Xuebao/Journal of Textile Research, 2019, 40 (12): : 178 - 184
[5] Resin transfer molding of composite structures
Wadsworth, Mark, 1600, (09):
[6] Process simulation for a large composite aeronautic beam by resin transfer molding
Laurenzi, S.
Grilli, A.
Pinna, M.
De Nicola, F.
Cattaneo, G.
Marchetti, M.
COMPOSITES PART B-ENGINEERING, 2014, 57 : 47 - 55
[7] Multiconstraint optimization of composite structures manufactured by resin transfer molding process
Park, CH
Lee, WI
Han, WS
Vautrin, A
JOURNAL OF COMPOSITE MATERIALS, 2005, 39 (04) : 347 - 374
[8] Stochastic Resin Transfer Molding Process
Park, M.
Tretyakov, M. V.
SIAM-ASA JOURNAL ON UNCERTAINTY QUANTIFICATION, 2017, 5 (01): : 1110 - 1135
[9] Resin transfer molding process optimization
Lin, MY
Murphy, MJ
Hahn, HT
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (04) : 361 - 371
[10] Formation and control of dry spot in resin transfer molding process of composite wings
Song G.
Zheng X.
Liu Z.
Chen N.
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (03): : 809 - 815

← 1 2 3 4 5 →