Surface strengthening technique for hard-machined material cutting tools

被引：0
|
作者：
Tao, Ye
Liu, Peiying
Zhang, Lingyun
机构：
来源：
Hangkong Zhizao Gongcheng/Aviation Production Engineering | 1996年 / 02期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
引用
收藏
页码：12 / 14
相关论文
共 50 条
  • [1] SURFACE STRENGTHENING OF CUTTING TOOLS
    MATSEVITY, VM
    KAZAK, IB
    BORUSHKO, MS
    [J]. DOPOVIDI AKADEMII NAUK UKRAINSKOI RSR SERIYA A-FIZIKO-MATEMATICHNI TA TECHNICHNI NAUKI, 1985, (08): : 80 - 82
  • [2] Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material
    Yong-Woo KIM
    Soo-Chang CHOI
    Jeung-Woo PARK
    Deug-Woo LEE
    [J]. Transactions of Nonferrous Metals Society of China, 2009, 19 (S1) : 194 - 201
  • [3] Characteristics of machined surface controlled by cutting tools and conditions in machining of brittle material
    Kim, Yong-Woo
    Choi, Soo-Chang
    Park, Jeung-Woo
    Lee, Deug-Woo
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 : S194 - S201
  • [4] Cutting Material Influence on the Quality of the Machined Surface
    Moravcikova, Jana
    [J]. 25TH DAAAM INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING AND AUTOMATION, 2014, 2015, 100 : 328 - 333
  • [5] Quantitative assessment of the causes of the strengthening of a machined surface after cutting
    Popov, Alexey
    Babak, Sergei
    [J]. INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2020, 14 (03) : 207 - 222
  • [6] Effect of cutting parameters on integrality of machined surface in hard cuffing
    Liu, XL
    Yan, FG
    Li, YF
    Wang, YJ
    Pen, HM
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 307 - 311
  • [7] Cutting Performance of Coated Tools and Machined Surface Integrity in Superalloy Clean Cutting
    Li X.
    Zheng G.
    Yan P.
    Sun Z.
    Cheng X.
    Liu H.
    [J]. Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2023, 34 (04): : 454 - 463
  • [8] Surface Roughness and Cutting Force of Inconel 718 Machined by Different Cutting Tools
    Geng, G. S.
    Xu, J. H.
    Fu, Y. C.
    Yang, B.
    [J]. SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING II, 2010, 135 : 232 - +
  • [9] The effect of extended glaze firing on the flexural fatigue strength of hard-machined ceramics
    Aurelio, Iana Lamadrid
    Prochnow, Catina
    Guilardi, Luis Felipe
    Ramos, Gabriela Freitas
    Bottino, Marco Antonio
    May, Liliana Gressler
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2018, 120 (05): : 755 - 761
  • [10] USE OF SPUTTERED HARD MATERIAL AND HARD METAL COATINGS FOR CUTTING TOOLS
    DEMARNE, V
    BERGMANN, E
    [J]. VAKUUM-TECHNIK, 1983, 32 (07): : 203 - 210
12345