Analysis on welding processing properties of plasma-TIG coupling arc hybrid welding

被引：0
|
作者：
Wang B. [1 ,2 ]
Sang J. [1 ]
Zhang H. [1 ,2 ]
Teng Y. [3 ]
Wang Q. [3 ]
机构：
[1] Harbin Institute of Technology at Weihai, Weihai
[2] Shandong Institute of Shipbuilding Technology, Weihai
[3] Yantai CIMC Raffles Offshore Co., Ltd., Yantai
来源：
Hanjie Xuebao/Transactions of the China Welding Institution | 2019年 / 40卷 / 06期
关键词：
Coupling arc; Hybrid welding; No spatter; Plasma-TIG;
D O I：
10.12073/j.hjxb.2019400161
中图分类号：
学科分类号：
摘要：
The plasma-TIG coupling arc hybrid welding process was proposed to improve the welding efficiency of mild steel. The stable coupling arc of plasma and TIG is realized under the action of electromagnetic force by designing the intensive torch, and the welding heat source characteristics of the coupling arc have been optimized. The arc shape, weld formation and, mechanical properties are analyzed. The results showed the coupling arc still have good deep penetration welding characteristics. Compared with plasma and TIG welding method, the coupled arc has more reasonable depth-width radio, and has the effect of shock stirring on droplet and welding pool, which promotes grain refinement and reduces the tendency of joint crystallization in fusion zone. One-side welding both sides formation could be achieved by use of the butt welding test with 5 mm thick Q235B steel plates, the weld was smooth without defects and the tensile strength was better than the base metal. © 2019, Editorial Board of Transactions of the China Welding Institution, Magazine Agency Welding. All right reserved.
引用
收藏
页码：94 / 99
页数：5
相关论文
共 11 条
  • [1] Cui X., Li L., Zhang Y., Research situation of high efficiency welding process, New Technology & New Process, 7, pp. 32-35, (2004)
  • [2] Feng Y., Zhou F., Jiang C., Status quo and development of double arc welding process, Welding & Joining, 1, pp. 5-9, (2002)
  • [3] Xiao R., Wu S., Progress on laser-arc hybrid welding, Chinese Journal of Lasers, 35, 11, pp. 1680-1685, (2008)
  • [4] Wang Y.J., Wei B., Guo Y.Y., Et al., Microstructure and mechanical properties of the joint of 6061 aluminum alloy by plasma-MIG hybrid welding, China Welding, 26, 2, pp. 58-64, (2017)
  • [5] Yang T., Zhang S., Gao H., Et al., Analysis of mechanism for TIG-MIG hybrid arc properties, Transactions of the China Welding Institution, 33, 7, pp. 25-28, (2012)
  • [6] Wang B., Zhu X.M., Zhang H.C., Et al., Characteristics of welding and arc pressure in the plasma-TIG coupled arc welding process, Metals, 8, 7, pp. 512-524, (2018)
  • [7] Lin Y., Li J., Wu Y., Et al., Study on the application of PAW and TIG hybrid welding (P + T), Metal Working(Metal Cutting), pp. 606-608, (2016)
  • [8] Zhang Y.M., Zhang S.B., Jiang M., Sensing and control of double-sided arc welding process, Journal of Manufacturing Science and Engineering, 124, 3, pp. 695-701, (2002)
  • [9] Chen J., Wu C.S., Chen M.A., Improvement of welding heat source models for TIG-MIG hybrid welding process, Journal of Manufacturing Processes, 16, 4, pp. 485-493, (2014)
  • [10] Zhang Y.M., Zhang S.B., Double-sided arc welding increases weld joint penetration, Welding Journal, 77, 6, pp. 57-61, (2000)
12