Properties of MTiO3 (M = Sr, Ba) and PbM'O3(M' = Ti, Zr) superlattice thin films fabricated by laser ablation

被引：0

作者：

Department of Chemistry and Institute of Natural Basic Sciences, Wonkwang University, Iksan, Jeonbuk 570-749, Korea, Republic of ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Bull. Korean Chem. Soc. | 2009年 / 1卷 / 201-204期

关键词：

Impedance analyzer - Number of layers - Properties of deposited films - SrTiO3 films - Super-lattice films - Super-lattice structures - Superlattice thin films - X ray diffractometers;

D O I：

10.5012/bkcs.2009.30.1.201

中图分类号：

学科分类号：

摘要：

BaTiO3/SrTiO3 and PbTiO3/PbZrO3 superlattice thin films were fabricated on Pt/Ti/SiO2/Si substrate by the pulsed laser deposition process. The morphologies and physical properties of deposited films were characterized by using X-ray diffractometer, HR-SEM, and Impedance Analyzer. XRD data and SEM images of the films indicate that each layer was well deposited alternatively in the superlattice structure. The dielectric constant of BaTiO3/SrTiO3 superlattice thin film was higher than that of individual BaTiO3 or SrTiO3 film. Same result was obtained in the PbTiO3/PbZrO3 system. The dielectric constant of a superlattice film was getting higher as the number of layer is increased.

引用

共 50 条

[1] Properties of MTiO3 (M = Sr, Ba) and PbM′O3(M′ = Ti, Zr) Superlattice Thin Films Fabricated by Laser Ablation
Lim, T. M.
Park, J. Y.
Han, J. S.
Hwang, P. G.
Lee, K. H.
Jung, K. W.
Jung, D.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY, 2009, 30 (01) : 201 - 204
[2] The strategy to fabricate the MTiO3 (M = sr, ba) thin films by laser ablation
Im, T. M.
Park, J. Y.
Kim, H. J.
Choi, H. K.
Jung, K. W.
Jung, D.
BULLETIN OF THE KOREAN CHEMICAL SOCIETY, 2008, 29 (02) : 427 - 430
[3] Influence of precursor chemistry on the formation of MTiO3 (M = Ba, Sr) ceramic thin films
Hasenkox, U
Hoffmann, S
Waser, R
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1998, 12 (02) : 67 - 79
[4] Influence of Precursor Chemistry on the Formation of MTiO3 (M = Ba, Sr) Ceramic Thin Films
U. Hasenkox
S. Hoffmann
R. Waser
Journal of Sol-Gel Science and Technology, 1998, 12 : 67 - 79
[5] Dielectric Properties of Ba(Zr, Ti)O3 Thin Films Fabricated by Pulsed Laser Deposition
Hino, Takanori
Nishida, Minoru
Araki, Takao
Ohno, Takahiro
Kawahara, Toshio
Murasugi, Masakazu
Tabata, Hitoshi
Kawai, Tomoji
JOURNAL OF LASER MICRO NANOENGINEERING, 2007, 2 (03): : 166 - 169
[6] First principle studies of electronic structures and optical properties of MTiO3 (M=Ca, Sr, Ba)
Gao, L.
Ma, Z.
Fan, Q.
MATERIALS RESEARCH INNOVATIONS, 2014, 18 : 1036 - 1039
[7] Relaxor properties of sputtered Ba(Ti,Zr)O3 thin films
Reymond, V
Bidault, O
Michau, D
Maglione, M
Payan, S
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2006, 39 (06) : 1204 - 1210
[8] Enhancement of the ferroelectric properties of Pb(Zr0.53 Ti0.47)O3 thin films fabricated by laser ablation
Jeon, CH
Kim, CS
Han, KB
Jhon, HS
Lee, SY
MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 2004, 109 (1-3): : 141 - 145
[9] Generalized large-scale synthesis of MTiO3 (M = Ba, Sr, Pb) nanocrystals
An, Changhua
Liu, Chunying
Wang, Shutao
Liu, Yunqi
MATERIALS RESEARCH BULLETIN, 2008, 43 (04) : 932 - 938
[10] Electromechanical properties of (Ba,Sr)(Zr,Ti)O3 ceramics
Li, Yao
Cheng, Hongbo
Xu, Huiwen
Zhang, Yunxiang
Yan, Peng
Huang, Ting
Wang, Chunming
Hu, Zhigao
Ouyang, Jun
CERAMICS INTERNATIONAL, 2016, 42 (08) : 10191 - 10196

← 1 2 3 4 5 →