Exergy analysis on the life cycle of ceramic parts

被引：0

作者：

Kita, Hideki ^{[1
]}

Hyuga, Hideki ^{[1
]}

Kondo, Naoki ^{[1
]}

Ohji, Tatsuki ^{[1
]}

机构：

[1] National Institute of Advanced Industrial Science and Technology (AIST), 2266-98 Shimo-Shidami, Moriyama-ku, Nagoya 463-8560, Japan

来源：

Key Engineering Materials | 2009年 / 403卷

关键词：

Tubes (components) - Ceramic materials - Tubular steel structures - Exergy - Life cycle - Manufacture;

D O I：

10.4028/3-908454-00-X.261

中图分类号：

学科分类号：

摘要：

Exergy is a measure which can commonly deal with the quantification of the variety of resources, products and energy coming in and going out the manufacturing systems. In this study, exergy analysis was conducted on ceramics and steel heater protection tube used in aluminum casting, and the amount of exergies consumed through their life cycle were calculated. In the production stage, ceramic heater tube consumes much higher exergy than the steel one does, however, analysis throughout the life cycle including production, operation and waste in seven years shows that exergy consumption for the ceramic tube is less than that of the steel tube.

引用

页码：261 / 264

共 50 条

[1] Exergy Analysis on the Life Cycle of Ceramic Parts
Kita, Hideki
Hyuga, Hideki
Kondo, Naoki
Ohji, Tatsuki
SIAIONS AND NON-OXIDES, 2009, 403 : 261 - 264
[2] EXERGY ANALYSIS ON LIFE CYCLE OF CERAMIC PARTS
Kita, Hideki
Hyuga, Hideki
Kondo, Naoki
Ohji, Tatsuki
ENVIRONMENTAL ISSUES AND WASTE MANAGEMENT TECHNOLOGIES IN THE MATERIALS AND NUCLEAR INDUSTRIES XII, 2009, 207 : 273 - 282
[3] Exergy consumption through the life cycle of ceramic parts
Kita, Hideki
Hyuga, Hideki
Kondo, Naoki
Ohji, Tatsuki
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2008, 5 (04) : 373 - 381
[4] Exergy analysis of the life cycle of steel
Centre for Environmental Strategy, Univ. of Surrey, Guildford, GU2 5XH, Surrey, United Kingdom
Energy, 3 (213-220):
[5] Exergy analysis of the life cycle of steel
Michaelis, P
Jackson, T
Clift, R
ENERGY, 1998, 23 (03) : 213 - 220
[6] Thermodynamic optimization of the life cycle of plastics by exergy analysis
Dewulf, J
Van Langenhove, H
INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2004, 28 (11) : 969 - 976
[7] Exergy, waste accounting, and life-cycle analysis
Ayres, RU
Ayres, LW
Martinas, K
ENERGY, 1998, 23 (05) : 355 - 363
[8] Application of exergy analysis and life cycle assessment to the oil industry
Portha, Jean-Francois
Archane, Anas
Pons, Marie-Noelle
Jaubert, Jean-Noel
Burkhardt, Thorsten
Hoffmann, Frederic
ECOS 2006: PROCEEDINGS OF THE 19TH INTERNATIONAL CONFERENCE ON EFFICIENCY, COST, OPTIMIZATION, SIMULATION AND ENVIRONMENTAL IMPACT OF ENERGY SYSTEMS, VOLS 1-3, 2006, : 801 - +
[9] Exergy analysis of the Kalina cycle
Nag, PK
Gupta, AVSSKS
APPLIED THERMAL ENGINEERING, 1998, 18 (06) : 427 - 439
[10] Exergy analysis of ceramic production in Jordan
Department of Aeronautical Engineering, Jordan University of Science and Technology, P.O. Box 3030, Irbid 22110, Jordan
Jordan J. Mech. Ind. Eng., 6 (483-488):

← 1 2 3 4 5 →