Sintering and evaluation of ZrO2 prepared by spark plasma sintering method

被引：0
|
作者：
Nakahira A. [1 ,2 ]
Naganuma H. [1 ]
Monden T. [1 ]
机构：
[1] Osaka PrefectureUniversity, Naka-ku, Sakai 599-8531
[2] Tohoko University, IMR, Osaka Center, Naka-ku, Sakai 599-8531
来源：
Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy | 2010年 / 57卷 / 07期
关键词：
Additive; Microstructure; Pressureless sintering; Spark plasma sintering; ZrO[!sub]2[!/sub;
D O I：
10.2497/jjspm.57.542
中图分类号：
学科分类号：
摘要：
ZrO2 ceramics containing CaO or MgO as an additive were fabricated by the spark plasma sintering (SPS) method and pressureless sintering (PS) method at 1300°C and 1500°C. Sintered samples were characterized by XRD and their microstructures were observed by SEM. Spark plasma sintering resulted in the successful fabrication of tetragonal ZrO2 bulks with fully dense microstructures over 99% of theoretical density, although ones prepared by the pressureless sintering (PS) method had the lower density of 93 %.
引用
收藏
页码：542 / 545
页数：3
相关论文
共 50 条
  • [1] Effect of ZrO2 on sintering behavior and properties of h-BN/ZrO2 composites by spark plasma sintering
    Zhang, Fan
    Chen, Mao
    Wang, Hailong
    Shao, Gang
    Qi, Yongshun
    Ma, Chengliang
    Fan, Bingbing
    Pian, Xiaoxuan
    Zhang, Rui
    Li, Hongxia
    Chen, Yongqiang
    [J]. CERAMICS INTERNATIONAL, 2022, 48 (23) : 34877 - 34884
  • [2] Rapid sintering of nanocrystalline ZrO2(3Y) by spark plasma sintering
    Li, W
    Gao, L
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (14-15) : 2441 - 2445
  • [3] The Formation of ZrO2–Ti Composites by Spark Plasma Sintering
    P. Lada
    A. Miazga
    J. Wozniak
    K. Konopka
    A. Olszyna
    [J]. Powder Metallurgy and Metal Ceramics, 2017, 55 : 644 - 649
  • [4] ZrO2 (3Y) toughened WC composites prepared by spark plasma sintering
    Zheng, Donghai
    Li, Xiaoqiang
    Li, Yuanyuan
    Qu, Shengguan
    Yang, Chao
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 572 : 62 - 67
  • [5] Coarse-grain CeO2 doped ZrO2 ceramic prepared by spark plasma sintering
    Vojtko, Marek
    Puchy, Viktor
    Mudra, Erika
    Milkovic, Ondrej
    Kovalcikova, Alexandra
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (14) : 4844 - 4852
  • [6] Phase assembly and microstructure of CeO2-doped ZrO2 ceramics prepared by spark plasma sintering
    Xu, T
    Wang, PL
    Fang, PG
    Kan, YM
    Chen, LD
    Vleugels, J
    Van der Biest, O
    Van Landuyt, J
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (15) : 3437 - 3442
  • [7] Ceramic of the Mullite–ZrO2–SiAlON System During Spark Plasma Sintering
    G. Sedmale
    M. Rundans
    I. Sperberga
    J. Setina
    A. Cimmers
    [J]. Refractories and Industrial Ceramics, 2016, 57 : 146 - 150
  • [8] Preparation and interfacial bonding of oversize ZrO2 reinforced metal matrix composites prepared by spark plasma sintering
    Gao, Xiang
    Wang, Wenxian
    Shang, Fangjing
    Liu, Ruifeng
    Zhao, Wei
    Sun, Tianming
    [J]. MATERIALS LETTERS, 2022, 329
  • [9] Densification mechanism and corrosion resistance of h-BN/ZrO2 ceramics prepared by spark plasma sintering
    Chen, Mao
    Zhang, Fan
    Wang, Hailong
    Shao, Gang
    Fan, Bingbing
    Zhang, Rui
    Li, Hongxia
    Chen, Yongqiang
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (03) : 871 - 880
  • [10] Synthesis and mechanical properties of ZrO2/Al2O3 composites prepared by spark plasma sintering
    Hong, JS
    De la Torre, SD
    Gao, L
    Miyamoto, K
    Miyamoto, H
    [J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1998, 17 (15) : 1313 - 1315
12345