Reliability sensitivity analysis of hydraulic axial piston pump volumetric efficiency

被引：0
|
作者：
Du Z. [1 ]
Zhang Y. [1 ]
Wang Y. [1 ]
机构：
[1] School of Mechanical Engineering, Shenyang University of Technology, Shenyang
来源：
Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology | 2020年 / 52卷 / 07期
关键词：
Clearance leakage; Fourth-order; Hydraulic axial piston pump; Reliability sensitivity; Volumetric efficiency;
D O I：
10.11918/201911042
中图分类号：
学科分类号：
摘要：
To improve the reliability and performance of hydraulic axial piston pump, the reliability design method of volumetric efficiency, one of the main performance indexes of axial piston pump, was investigated. The instantaneous leakage flow rate and volumetric efficiency of the axial piston pump with the cylinder body at any instantaneous angle are deduced by comprehensively analyzing the instantaneous leakage of a single piston. The reliability and reliability sensitivity analysis method of the axial piston pump are established by using the random perturbation theory and the fourth-order moment technology, and the accuracy and rationality of the proposed method are verified by Monte Carlo method. The results show that the reliability of the hydraulic axial piston pump fluctuates periodically with the angle of the cylinder block, the reliability is the lowest when the piston passes through the top dead center, although the reliability fluctuates relatively greatly when the number of pistons is 9, but its overall reliability level is higher than that of the 8 pistons. The clearance between the slipper and the swash plate, and between the cylinder block and the port plate has a greater impact on the reliability, while the clearance between the piston and the piston chamber, and between the slipper and the piston ball hinge has a smaller impact. The method presented in this paper provides a theoretical reference for the research, design, process and quality control of axial piston pump. © 2020, Editorial Board of Journal of Harbin Institute of Technology. All right reserved.
引用
收藏
页码：179 / 185
页数：6
相关论文
共 22 条
  • [1] BERGADA J. M, KUMAR S, WATTON J., Axial piston pumps, new trends and development, (2017)
  • [2] -SUL Jeong HEON, A novel performance model given by the physical dimensions of hydraulic axial piston motors: model derivation, Journal of Mechanical Science and Technology, 21, 1, (2007)
  • [3] YANG Huayong, ZHANG Bin, XU Bing, Development of axial piston pump/motor technology, Chinese Journal of Mechanical Engineering, 44, 10, (2008)
  • [4] -SUL Jeong HEON, -EUI Kim HYOUNG, A novel performance model given by the physical dimensions of hydraulic axial piston motors: experimental analysis, Journal of Mechanical Science and Technology, 21, 4, (2007)
  • [5] BERGADA J M, KUMAR S, DAVIES D L., A complete analysis of axial piston pump leakage and output flow ripples, Applied Mathematical Modelling, 36, 4, (2011)
  • [6] HALL JASON S., Statistical analysis of multiple hydrostatic pump flow loss models, (2014)
  • [7] GUO Weidong, WANG Zhanlin, Analysis for the real flowrate of a swashplate axial piston pump, Journal of Beijing University of Aeronautics and Astronautics, 22, 2, (1996)
  • [8] ZHANG Yimin, Connotation and development of mechanical reliability based design, Chinese Journal of Mechanical Engineering, 46, 14, (2010)
  • [9] ZHAO Jingyi, YAO Chengyu, Overview of China's hydraulic reliability technology, Chinese Hydraulics & Pneumatics, 10, (2013)
  • [10] ZHANG Yimin, LIU Qiaoling, Reliability-based design of automobile components, Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 216, 6, (2002)
123