Stress-strain responses of EPS geofoam upon cyclic simple shearing: Experimental investigations and constitutive modeling

被引:0
|
作者
Zou, Weilie [1 ,2 ]
Li, Yuhang [1 ]
Han, Zhong [1 ,2 ]
Xiang, Qi [1 ]
Wang, Xiequn [3 ]
机构
[1] School of Civil Engineering, Wuhan University, Hubei, Wuhan, China
[2] Key Laboratory of Rock Mechanics in Hydraulic Structural Engineering of the Ministry of Education, Wuhan University, Hubei, Wuhan, China
[3] School of Civil Engineering and Architecture, Wuhan University of Technology, Hubei, Wuhan, China
基金
中国国家自然科学基金;
关键词
Bulk Density - Damping - Elastic moduli - Shear deformation - Shear strain - Shearing;
D O I
10.1016/j.geotexmem.2024.10.004
中图分类号
学科分类号
摘要
This paper investigates the cyclic simple shearing behaviors of Expanded Polystyrene (EPS) geofoams considering influences of the shear strain amplitude (γa), number of shear cycles, shear rate, vertical stress (σn), and EPS density (ρEPS). The experimental results demonstrate that the cyclic shear stress (τ)-shear strain (γ) relationships of EPS are not sensitive to the shear rate. As the γ exceeds 2%, the EPS yields and its τ-γ relationships and backbone curve become nonlinear. There are linear relationships between the elastic modulus E, elastic shear modulus Ge, and plastic shear modulus Gp. They increase linearly with an increase in the ρEPS. The Ge and Gp are not sensitive to the γa. The cyclic shear stiffness G increases while the equivalent damping ratio D of EPS decreases with an increase in the σn and ρEPS. The G decreases while the D increases nonlinearly as the γa increases. Empirical models were developed to describe the variations of the Ge, Gp, G, and D with σn, ρEPS, and γa. A modified Hardin-Drnevich model was proposed to describe the backbone curves and τ-γ loops upon cyclic simple shearing, which has achieved good agreement with the experimental measurements and the testing results from the literature. © 2024 Elsevier Ltd
引用
收藏
页码:350 / 364
相关论文
共 50 条
  • [1] Stress-strain modeling of EPS geofoam for large-strain applications
    Hazarika, H
    [J]. GEOTEXTILES AND GEOMEMBRANES, 2006, 24 (02) : 79 - 90
  • [2] RATE EFFECTS ON THE STRESS-STRAIN BEHAVIOUR OF EPS GEOFOAM
    Abdelrahman, G. E.
    Kawabe, Shohei
    Tatsuoka, Fumio
    Tsukamoto, Yoshimichi
    [J]. SOILS AND FOUNDATIONS, 2008, 48 (04) : 479 - 494
  • [3] Stress-strain relationship under multi-directional cyclic simple shearing
    Fukutake, Kiyoshi
    Matsuoka, Hajime
    [J]. Doboku Gakkai Rombun-Hokokushu/Proceedings of the Japan Society of Civil Engineers, 1993, (463 pt 3-22): : 75 - 84
  • [4] Constitutive modeling of stress-strain curves of IF austenite
    Lino, R. E.
    Barbosa, R.
    [J]. THERMEC 2006, PTS 1-5, 2007, 539-543 : 4202 - +
  • [5] Experimental investigations and constitutive modeling of cyclic interface shearing between HDPE geomembrane and sandy gravel
    Cen, W. J.
    Bauer, E.
    Wen, L. S.
    Wang, H.
    Sun, Y. J.
    [J]. GEOTEXTILES AND GEOMEMBRANES, 2019, 47 (02) : 269 - 279
  • [6] Discussion of the Constitutive Relation on Cyclic Stress-Strain of Engineering Materials
    唐俊武
    王建国
    徐世平
    王枨
    [J]. 工程科学学报, 1989, (06) : 611 - 615
  • [7] Modeling of stable cyclic stress-strain responses under non-proportional loading
    Li, Jing
    Li, Chun-wang
    Zhang, Zhong-ping
    [J]. ZAMM-ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2018, 98 (03): : 388 - 411
  • [8] Constitutive models for regression of various experimental stress-strain relations
    Hu, Weilong
    Lin, Yanli
    Yuan, Shijian
    He, Zhubin
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 101 : 1 - 9
  • [9] Experimental study and constitutive model on complete stress-strain relations of plain concrete in uniaxial cyclic tension
    Xudong Chen
    Lingyu Xu
    Jingwu Bu
    [J]. KSCE Journal of Civil Engineering, 2017, 21 : 1829 - 1835
  • [10] Experimental characterization of cyclic stress-strain response and its modeling for filled SBR vulcanizates
    Yamabe, J.
    Fujikawa, M.
    Kodama, Y.
    Koishi, M.
    [J]. CONSTITUTIVE MODELS FOR RUBBER VIII, 2013, : 163 - 169