Flux cored wire for steel sheet with fatigue strength improvement

被引：0

作者：

Nippon Steel Corporation, Welding and Joining Research Center, Japan ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Yosetsu Gakkai Ronbunshu | 2009年 / 2卷 / 158s-162s期

关键词：

Steel sheet - Automotive industry - Bending tests - Fatigue testing - Welding - Slags;

D O I：

10.2207/qjjws.27.158s

中图分类号：

学科分类号：

摘要：

A flux cored wire for to steel sheet welding in automobile industries has been developed. The present wire is designed to reduce the slag formation to the level of conventional solid wire by controlling oxides in the flux. The present wire also contains comparatively high C, Ni and Cr so as to improve fatigue strength of a lap joint. The experimental results of plane bending fatigue tests reveal that the fatigue strength at 2 million cyclic loading is about 50% higher than that of ordinary solid wire. The charpy tests using the 1/4-size V notch specimens show that the absorbed energy of the present wire's weld metal at -40oC is almost equivalent to that of the conventional solid wire. Hence, it is concluded that the flux cored wire developed in the present work can be applied to steel sheet welding in automobile industries with high fatigue strength and high charpy impact properties.

引用

共 50 条

[1] Flux cored wire for fatigue strength improvement, SX-1LD
Kasuya, Tadashi
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2009, 78 (04): : 8 - 11
[2] FLUX-CORED WIRE FOR WELDING OF STEEL
LEE, RH
WELDING JOURNAL, 1965, 44 (05) : 387 - &
[3] Flux cored welding wire for 9%ni steel
R and D Kobe Steel Eng Reps, 2009, 1 (111-115):
[4] Fatigue strength of sheet steel
Toyama, Kazuo
Kurita, Masato
Sumitomo Metals, 1993, 45 (05): : 121 - 128
[5] Improvement of fatigue strength of high strength hot rolled steel sheet for truck frame use
Tomita, K
Shiozaki, T
Urabe, T
Osawa, K
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2001, 87 (08): : 557 - 563
[6] Improvement and prediction of spattering properties of flux-cored solder wire
Cheng J.
Li C.-W.
Han H.
Cheng, Jiang (cejcheng@scut.edu.cn), 1600, Zhejiang University (31): : 156 - 160
[7] FLUX CORED WIRE WELDS LARGE STAINLESS-STEEL PLENUM
不详
WELDING JOURNAL, 1990, 69 (11) : 57 - 57
[8] Fatigue Strength Improvement of Lap Welded Joints by Low Transformation Temperature Welding Wire — Superior Improvement with Strength of Steel
A. Ohta
N. Suzuki
Y. Maeda
S. J. Maddox
Welding in the World, 2003, 47 (3-4) : 38 - 43
[9] IMPROVEMENT OF STEEL QUALITY AND YIELD WITH CASI CORED WIRE INJECTION IN LADLE
SASTRI, EC
CHATTERJEE, RK
LAL, K
GHOSH, A
SAHA, PP
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 1992, 45 (02): : 101 - 107
[10] Fatigue strength of deformed steel sheet structures
Marquardt, C
Hatscher, A
Masendorf, R
Zenner, H
MATERIALPRUFUNG, 2002, 44 (06): : 246 - 252

← 1 2 3 4 5 →