Numerical simulation and experimental validation for erosion wear of TC4 plates

被引：0
|
作者：
Yang X. [1 ]
Liu X. [1 ]
Liu W. [1 ]
Yuan Z. [1 ]
机构：
[1] College of Aeronautical Engineering, Civil Aviation University of China, Tianjin
来源：
Hangkong Dongli Xuebao/Journal of Aerospace Power | 2023年 / 38卷 / 09期
关键词：
erosion rate; finite element method; impingement angle; particle shape; TC4; plate;
D O I：
10.13224/j.cnki.jasp.20210647
中图分类号：
学科分类号：
摘要：
In order to accurately predict the erosion rate of TC4 material under different erosion mechanisms， a multi-particle random erosion model was established by finite element method， and the erosion mechanism and erosion rate of TC4 plate under the erosion of Al2O3 particles with different particle shapes，impact angles and impact velocities were studied. Compared with the erosion rate obtained by erosion test under the same conditions， the rationality and authenticity of the numerical simulation model were verified. Results showed that cubic particles should be used in the simulation of low-angle erosion at 30 degrees，and the relative movement between edges and materials was more in line with the cutting process. Spherical particles should be used in the simulation of 90 degrees high-angle erosion，which can reflect the shearing and squeezing effects on the contact surface of pits during erosion. Under the same conditions，the greater the impact velocity of particles was，the faster the erosion rate increased，the faster the erosion rate increased at 30 degrees， and the more gentle the erosion rate increased at 90 degrees. © 2023 BUAA Press. All rights reserved.
引用
收藏
页码：2193 / 2203
页数：10
相关论文
共 20 条
  • [1] HAMED A，, TABAKOFF W C，, WENGLARZ R V., Erosion and deposition in turbomachinery, Journal of Propulsion and Power, 22, 2, pp. 350-360, (2006)
  • [2] FINNIE I, MCFADDEN D H., On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence, Wear, 48, 1, pp. 181-190, (1978)
  • [3] BITTER J G A., A study of erosion phenomena: Part Ⅰ[J], Wear, 6, 1, pp. 5-21, (1963)
  • [4] BITTER J G A., A study of erosion phenomena: Part Ⅱ[J], Wear, 6, 1, pp. 169-190, (1963)
  • [5] ELTOBGY M S, NG E, ELBESTAWI M A., Finite element modeling of erosive wear, International Journal of Machine Tools and Manufacture, 45, 11, pp. 1337-1346, (2005)
  • [6] WANG Yufei, YANG Zhenguo, Finite element model of erosive wear on ductile and brittle materials[J], Wear, 265, 5, pp. 871-878, (2008)
  • [7] AZIMIAN M, SCHMITT P, BART H J., Numerical investigation of single and multi-impacts of angular particles on ductile surfaces, Wear, 342, 343, pp. 252-261, (2015)
  • [8] MA Songlin, ZHAO Zhenhua, YAN Cheng, Et al., Numerical simulation of TC4 plates with high speed erosion of sand dust with different shapes, Journal of Aerospace Power, 34, 2, pp. 321-330, (2019)
  • [9] DU Mingchao, LI Zengliang, DONG Xiangwei, Et al., Analysis of material surface erosion characteristics due to rhomboid-shaped particle impact, Tribology, 40, 1, pp. 1-11, (2020)
  • [10] WANG Guangcun, Study on erosion wear mechanism and law of impeller in centrifugal compressor, (2015)
12