Impact of nano cerium oxide addition with pyrolysis waste plastic oil on combustion, performance and emission characteristics of CRDI diesel engine

被引:0
|
作者
Madhuvanesan, D.M. [1 ]
Babu, J.M. [1 ]
机构
[1] Department of Mechanical Engineering, Vel Tech, Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Avadi, Chennai,600062, India
来源
Engineering Research Express | 2024年 / 6卷 / 04期
关键词
D O I
10.1088/2631-8695/ad923e
中图分类号
学科分类号
摘要
This investigation examined the effect of incorporating cerium oxide (CeO2) nanoparticle into diesel and waste plastic oil (WPO) blends on the combustion, performance and emission characteristics of the diesel engine. The WPO was extracted from low density polyethylene using plastic pyrolysis. The blending of diesel and WPO with combination of D70:WPO30 and D50:WPO50 was prepared to evaluate the engine operation. Additionally, the spherical sized CeO2 with 50 mg l−1 and 100 mg l−1 was added with this blend. The various blends named as Diesel, D-WPO30, D-WPO30+Ce50, D-WPO30+Ce100, D-WPO50, D-WPO50+Ce50 and D-WPO50+Ce100 were used in this investigation to operate the engine under various load conditions. The experiment was performed using water cooled common rail direct injection (CRDI) diesel engine with prepared D-WPO blend. Different characteristics such as In-cylinder pressure (CP), heat release rate (HRR), ignition delay time (IDT), brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and exhaust gas temperature (EGT), carbon monoxide (CO), hydrocarbon (HC), nitrogen oxide (NOx) and smoke opacity emission are studied with respect to the effect of different blends and applied load used. It was observed that increasing of CeO2 nanoparticles in blend improved the overall performance and emission of the engine. Form the results, D-WPO30+Ce100 blend showed enhanced brake thermal efficiency (BTE), brake specific fuel consumption (BSFC) and exhaust has temperature (EGT) are 28.2%, 3% and 465 °C respectively. Similarly, reduced emission of CO, NOx, HC and smoke opacity was observed in the CeO2 added blends particularly at 100 mg l−1. It was concluded that among all blends prepared, the D70:WPO30 with 100 mg l−1 of CeO2 showed improved combustion, performance and emission characteristics in proposed diesel engine. © 2024 IOP Publishing Ltd. All rights, including for text and data mining, AI training, and similar technologies, are reserved.
引用
收藏
相关论文
共 50 条
  • [1] Investigation of performance, emission, combustion characteristics of municipal waste plastic oil fueled diesel engine with nano fluids
    Jeyakumar, Nagarajan
    Narayanasamy, Bose
    [J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2020,
  • [2] Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil
    Mani, M.
    Subash, C.
    Nagarajan, G.
    [J]. APPLIED THERMAL ENGINEERING, 2009, 29 (13) : 2738 - 2744
  • [3] Performance and emission characteristic studies on CRDI diesel engine fuelled with plastic pyrolysis oil blended with ethanol and diesel
    Gadwal, Sudershan B.
    Banapurmath, N. R.
    Kamoji, M. A.
    Rampure, P. B.
    Khandal, S., V
    [J]. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2019, 12 (04) : 262 - 271
  • [4] Combustion and emission characteristics of diesel engine fuelled with waste plastic oil - a review
    Pakiya Pradeep, A.
    Gowthaman, S.
    [J]. INTERNATIONAL JOURNAL OF AMBIENT ENERGY, 2019, 43 (01) : 1269 - 1287
  • [5] Feasibility Analysis of Pyrolysis Waste Engine Oil in CRDI Diesel Engine
    Ramanathana, Anand
    Santhoshkumara, A.
    [J]. INNOVATIVE SOLUTIONS FOR ENERGY TRANSITIONS, 2019, 158 : 755 - 760
  • [6] Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil
    Kalargaris, Ioannis
    Tian, Guohong
    Gu, Sai
    [J]. FUEL PROCESSING TECHNOLOGY, 2017, 157 : 108 - 115
  • [7] Experimental investigation of performance, emission and combustion characteristics of waste plastic pyrolysis oil blended with diethyl ether used as fuel for diesel engine
    Devaraj, J.
    Robinson, Y.
    Ganapathi, P.
    [J]. ENERGY, 2015, 85 : 304 - 309
  • [8] Experimental investigation on the combustion, performance and emission characteristics of 1-pentanol blended waste plastic oil in a CRDI engine with EGR
    Chaitanya, A. V. Krishna
    Mohanty, Dillip Kumar
    [J]. ENERGY, 2022, 256
  • [9] Effect of various ethanol/diesel cosolvents addition on combustion and emission characteristics of a CRDI heavy diesel engine
    Liang, Jichao
    Zhang, Quanchang
    Ma, Qixin
    Chen, Zheng
    Zheng, Zunqing
    [J]. ENERGY REPORTS, 2022, 8 : 735 - 748
  • [10] Experimental investigation of performance, emission and combustion characteristics of a CI engine fuelled by blends of waste plastic oil with diesel
    Devi, Dunga Simhana
    Kumar, Ravinder
    Rajak, Upendra
    [J]. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2022, 44 (03) : 7693 - 7708