Mechanism of maleic anhydride-vinyl acetate-higher amine terpolymer as pour point depressant for diesel fuel

被引：0
|
作者：
Du T. [1 ]
Liu H. [2 ]
Wang S. [1 ]
Gu Z. [3 ]
Zhang H. [4 ]
机构：
[1] State Key Laboratory of Heavy Oil Processing, China University of Petroleum
[2] Faculty of Chemical Science and Engineering, China University of Petroleum
[3] Technology Bureau of Dazhou City of Sichuan Province
[4] China National Oil and Gas Exploration and Development Corporation
来源：
Shiyou Xuebao, Shiyou Jiagong/Acta Petrolei Sinica (Petroleum Processing Section) | 2010年 / 26卷 / 03期
关键词：
Co-crystallization; Cold filter plugging point; Mechanism; Pour point depressant; Wax crystal;
D O I：
10.3969/j.issn.1001-8719.2010.03.017
中图分类号：
学科分类号：
摘要：
The mechanism of maleic anhydride-vinyl acetate-higher amine terpolymer (MV-a) as the pour point depressant for diesel oil was explored preliminarily by using infrared spectrometry(IR), differential scanning calorimeter(DSC) and dynamic light scattering(DLS) methods. The IR adsorption peak area ratios of A1363/A1377 and A722/A733 were increased remarkably for the wax sample separated from diesel oil with MV-a added, compared with that of wax sample without MV-a, showing that the structure of wax crystal was varied obviously. The co-crystallization of wax crystal and MV-a molecules might be the mechanism of cold filter plugging point reduction for diesel oil. If the peak areas and slopes of DSC curves reduced obviously for the diesel oil with MV-a added compared with that without MV-a, it will be better for the cold filter plugging point reduction of diesel oil. The colloidal dispersion was formed when the grain diameter of MV-a in diesel oil was less than 1000 nm, and the cold filter plugging point depression was better, too.
引用
收藏
页码：414 / 418
页数：4
相关论文
共 11 条
  • [1] Zhang J., Wu C., Wang Y., Et al., Molecular design of pour point depressants, Chemical Industry and Engineering Progress, 21, 4, pp. 239-242, (2002)
  • [2] Ei-Gamal I.M., Khidr T.T., Ghuiba F.M., Nitrogen-based copolymers as wax dispersants for paraffinic gas oils, Fuel, 77, 5, pp. 375-385, (1998)
  • [3] Li H., Shen B., Gu Y., Comparison of theoretical prediction with practical morphology of wax in diesel fuel, Acta Petrolei Sinica (Petroleum Processing Section), 22, 2, pp. 27-33, (2006)
  • [4] El-Gamal I.M., Atta A.M., Al-Sabbagh A.M., Polymeric structures as cold flow improvers for waxy residual fuel oil, Fuel, 76, 14-15, pp. 1471-1478, (1997)
  • [5] Zhang H., Liu H., Wang S., Synthesis of a new low temperature flow improver for diesel fuel and its CFPP reducing properties, Acta Petrolei Sinica (Petroleum Processing Section), 24, 1, pp. 85-89, (2008)
  • [6] pp. 41-43, (1983)
  • [7] Zhang F., Wang B., Studies on the mechanisms involved in pour point depression and viscosity deduction by some pour point depressants/viscosity reducers, Oilfield Chemistry, 12, 4, pp. 347-352, (1995)
  • [8] (2003)
  • [9] Li H., Shen B., Kong L., Et al., Cold flow properties of diesel with cold flow improver, Journal of East China University of Science and Technology (Natural Science Edition), 31, 1, pp. 43-47, (2005)
  • [10] Zhang J., Wu C., Li W., Et al., Study on performance mechanism of pour point depressants with differential scanning calorimeter and X-ray diffraction methods, Fuel, 82, 11, pp. 1419-1426, (2003)
12