Performance simulation and testing of two-levels-damping adjustable hydraulic shock absorber

被引：0
|
作者：
Jiang H. [1 ]
Hu J. [1 ]
Chen L. [1 ]
Wang R. [1 ]
Sun P. [1 ]
机构：
[1] School of Traffic and Automobile Engineering, Jiangsu University
来源：
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering | 2010年 / 46卷 / 22期
关键词：
Bench test; Conjugate beam method; Damping-adjustable shock absorber; Performance simulation; Valve plate deflection;
D O I：
10.3901/JME.2010.22.117
中图分类号：
学科分类号：
摘要：
Adjustable shock absorber is a key part of vehicle semi-active suspension. According to the damping control demand of electric-controlled semi-active suspension of a certain bus, the structure of a two-levels-damping adjustable shock absorber is designed on the basis of the original passive hydraulic shock absorber of the bus. The deflections of shock absorber's valve plates are calculated by using conjugate beam method, and a mathematical model for the damping characteristics of the adjustable shock absorber is established. Main structural affection factors to shock absorber's damping performance such as the piston rod diameter, damping valve orifice and adjustable orifice are analyzed by simulation. Then the damping performance bench test of the adjustable shock absorber specimen is carried out for verification. The test results show that two-stage damping states of shock absorber change obviously, the switching control of damping state is precise, damping force deviations between the test results and the simulation results are less than 8%. It is verified that the established model for adjustable shock absorber has high accuracy and the conjugate beam method for calculating the deflections of shock absorber's valve plates is available, the research results provide important basis for designing adjustable shock absorber and studying vehicle semi-active suspension. © 2010 Journal of Machanical Engineering.
引用
收藏
页码：117 / 122
页数：5
相关论文
共 10 条
  • [1] Pavel P., Michal H., Design of characteristics of air-pressure-controlled hydraulic shock absorbers in an intercity bus, Multibody Syst. Dyn., 19, pp. 73-90, (2008)
  • [2] Hiromichi N., Technology for measuring the damping force of shock absorbers and the constant of coil springs mounted on a motorcycle by the un-sprung mass vibration method, (2004)
  • [3] Fang E., Design of adjustable-damping shock absorber and study on semi-active suspension, (2004)
  • [4] Zheng X., Large Deflection Theory and Application of Circular Plate Circular Plate, (1992)
  • [5] Li S., Bi F., Zou L., Analysis of the large warpage deformation and characteristic of valve plate in dual cylinder hydraulic shock absorber, Automotive Technology, 11, pp. 22-25, (1997)
  • [6] Li Y., Li J., Song D., Et al., A research on the deformation of spring valve plate in automotive shock absorbers, Automotive Engineering, 25, 3, pp. 287-290, (2003)
  • [7] Jiang H., Yang R., Sun L., Simulation and testing of damping characteristics of hydraulic shock absorber for front MacPherson suspension, Automotive Engineering, 29, 11, pp. 970-974, (2007)
  • [8] Zhou C., Gu L., Superposition throttle-slices opening size and characteristic test of telescope damper, Chinese Journal of Mechanical Engineering, 43, 6, pp. 210-215, (2007)
  • [9] Chen Y., Gu L., Yang Z., Et al., Research on the large deflection of shock absorber throttle slice, Machinery Design & Manufacture, 10, pp. 90-92, (2008)
  • [10] Liu H., The application of conjugate beam method in the calculation of deformation, Journal of Changsha University, 2, pp. 63-66, (2002)
1