Study on the Consolidation Characteristics of Slurry-like Mud Treated by Flocculation–Solidification–High-Pressure Filtration Combined Method

The disposal and reutilization of the enormous amounts of slurry-like mud (MS) dredged from navigation channel construction, ecological dredging, and other construction activities have been receiving increasing attention. In this paper, a flocculation–solidification–high-pressure filtration combined method (FSHCM) is used to treat MS, and the consolidation characteristics of The SHCM-treated MS are studied by conducting a series of one-dimensional consolidation compression tests. Various parameters, including the dosage of the curing agent, initial water content, and dry weight of the MS, are systematically analyzed to evaluate their influence on the consolidation behavior. The experimental results demonstrate that higher curing agent and initial water contents enhance the structural yield stress and compressive resistance, while increased dry weight decreases the structural yield stress but increases the compressive strain and void ratio. As the curing age increases, the ability of the FSHCM-treated MS to resist compressive deformation is further enhanced. In addition, the compressibility of the mud cake samples changes significantly at the yield point. This study has practical guiding significance for the optimal design and long-term application of FSHCM-treated MS. © 2024 by the authors.