Study on austenite stainless steel single arc welding of austenite stainless steel twin electrode

被引：0

作者：

Dept. of Material Science and Engineer, Shandong Jianzhu University, Jinan 250101, China ^{[1
]}

不详 ^{[2
]}

机构：

来源：

Cailiao Kexue yu Gongyi | 2007年 / 4卷 / 560-563期

关键词：

Austenitic stainless steel - Electric arc welding - Electric currents - Electric potential - Thermocouples;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The influence of static characteristic, welding current, arc voltage and core wires gap of single arc welding of austenite stainless steel twin electrode on technological performances and appearance of welding were investigated. The surface temperature of different locations of core wires was tested by means of thermocouple. The result shows that the technology is feasible for material of 1Cr18Ni9Ti and the good formation of weld can be obtained under the condition of diameter of the twin A102 electrode φ 4.0 mm, gap of two cords 1.2-1.5 mm, welding current 140-160 A, arc voltage about 45V.

引用

共 50 条

[1] ANTIFERROMAGNETISM OF AUSTENITE STAINLESS-STEEL
MENSHIKOV, AZ
TEPLYKH, AY
FIZIKA METALLOV I METALLOVEDENIE, 1984, 57 (02): : 391 - 393
[2] Structure of carbochromized austenite stainless steel
Zhang, Zhenxin
Sun, Wenshan
Jinshu Rechuli Xuebao/Transactions of Metal Heat Treatment, 1994, 15 (02):
[3] Study on the crystallography of austenite precipitates in a duplex stainless steel
Qiu, Dong
Zhang, Wenzheng
Solid-Solid Phase Transformations in Inorganic Materials 2005, Vol 1, 2005, : 125 - 131
[4] Numerical and experimental investigation on friction welding of austenite stainless steel and middle carbon steel
Geng, Peihao
Qin, Guoliang
Zhou, Jun
JOURNAL OF MANUFACTURING PROCESSES, 2019, 47 : 83 - 97
[5] INFLUENCE OF NITROGEN ADDITION IN AUSTENITE STAINLESS-STEEL BY CONSUMABLE HOLLOW ELECTRODE ARC REMELTING
SAKATA, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1984, 70 (12): : S954 - S954
[6] Fabrication and characterization of austenite-ferrite stainless steel bimetals by twin wire arc additive manufacturing
Kumar, Ashish
Maji, Kuntal
Samanta, Avishek
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2025, 39 (05) : 708 - 733
[7] Fabrication and characterization of austenite-ferrite stainless steel bimetals by twin wire arc additive manufacturing
Kumar, Ashish
Maji, Kuntal
Samanta, Avishek
Journal of Adhesion Science and Technology, 2024,
[8] Corrosion of an austenite and ferrite stainless steel weld
Rajakovic-Ognjanovic, Vladana N.
Grgur, Branimir N.
JOURNAL OF THE SERBIAN CHEMICAL SOCIETY, 2011, 76 (07) : 1027 - 1035
[9] AUSTENITE STABILIZATION IN STAINLESS-STEEL BY HYDROGEN
IYER, KJL
RAMACHANDRAN, EG
RUGE, J
ARCHIV FUR DAS EISENHUTTENWESEN, 1978, 49 (09): : 461 - 462
[10] Thermal Ageing of Cast Austenite Stainless Steel
Bazaras, Z.
Timofeeva, S. E.
Timofeev, B. T.
TRANSPORT MEANS 2009, 2009, : 150 - 152

← 1 2 3 4 5 →