Effect of styrofoam particles on the surface roughness of lost foam casting with EPS pattern

被引：0
|
作者：
Mi, Guo-Fa
Liu, Xiang-Yu
Zhao, Heng-Tao
Jia, Bao-Qian
机构：
[1] School of Materials Science and Engineering, He'nan Polytechnic University, Jiaozuo 454000, China
[2] School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
来源：
Zhuzao/Foundry | 2007年 / 56卷 / 10期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effects of the grain size and grain gradation of styrofoam particles as well as the expendable polystyrene (EPS) forming tools on the surface roughness of EPS patterns were studied in the paper. The results show that with the decrease of pre-expended polystyrene grain size, the surface roughness of EPS patterns decrease under the same processing parameters. The grain size gradation of styrofoam particles could reduce the surface roughness of EPS patterns evidently. The EPS pattern possesses the lowest surface roughness when the volume ratio of the polystyrene particles (with grain size of 30 grades and 40 grades) was 1:1. With the decrease of surface roughness of forming tools, the surface roughness of EPS pattern and casting are decreased.
引用
收藏
页码：1110 / 1102
相关论文
共 50 条
  • [1] Simulation of EPS foam decomposition in the lost foam casting process
    Liu, X. J.
    Bhavnani, S. H.
    Overfelt, R. A.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 182 (1-3) : 333 - 342
  • [2] Influence of EPS bead fusion on pattern degradation and casting formation in the lost foam process
    J. Rossacci
    S. Shivkumar
    Journal of Materials Science, 2003, 38 : 2321 - 2330
  • [3] Influence of EPS bead fusion on pattern degradation and casting formation in the lost foam process
    Rossacci, J
    Shivkumar, S
    JOURNAL OF MATERIALS SCIENCE, 2003, 38 (11) : 2321 - 2330
  • [4] Numerical modeling of EPS foam decomposition in the lost foam casting process
    Liu, X. J.
    Bhavnani, S. H.
    Overfelt, R. A.
    Proceedings of the ASME Heat Transfer Division 2005, Vol 1, 2005, 376-1 : 167 - 175
  • [5] Effect of Pouring Temperature and Casting Thickness on Fluidity, Porosity and Surface Roughness in Lost Foam Casting of Gray Cast Iron
    Suyitno
    Sutiyoko
    INTERNATIONAL CONFERENCE ON ADVANCES SCIENCE AND CONTEMPORARY ENGINEERING 2012, 2012, 50 : 88 - 94
  • [6] Research of foam pattern processing for lost foam casting
    Chen, Hong-ze
    Shan, Zhong-de
    Dong, Hong-zhao
    2013 INTERNATIONAL CONFERENCE ON PROCESS EQUIPMENT, MECHATRONICS ENGINEERING AND MATERIAL SCIENCE, 2013, 331 : 600 - +
  • [7] Study on the thermal degraded products of EPS in the lost foam casting process
    Yang, Jiakuan
    Huang, Naiyu
    Li, Yan
    Tezhong Zhuzao Ji Youse Hejin/Special Casting & Nonferrous Alloys, 2000, (04): : 22 - 24
  • [8] Effects of Pouring Temperature and Slurry Viscosity on Heat Transfer and Surface Roughness in Lost Foam Casting
    Shayganpour, A.
    Idris, M. H.
    Izman, S.
    Farahany, S.
    4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), PT 1 AND 2, 2012, 1440 : 1264 - 1270
  • [9] The Effect of Reducing Molecular Weight of the Foam Pattern on the Porosity of al Alloy Castings in the Lost Foam Casting Process
    Siavashi, K.
    Topping, C.
    Griffiths, W. D.
    NEW FRONTIERS IN LIGHT METALS, 2010, : 295 - 302
  • [10] Effects of the Wettability Between the Coating and the Liquid EPS on the Filling Process of Lost Foam Casting
    Chi Sun
    Zhanyi Cao
    International Journal of Metalcasting, 2024, 18 : 1318 - 1328
12345