Research on quality evaluation criteria of sheet metal drawing forming based on finite element analysis and optimization of process parameters

被引：0
|
作者：
Sun, Guangyong [1 ]
Li, Guangyao [1 ]
Zhang, Yong [1 ]
Cui, Xiangyang [1 ]
机构：
[1] State Key Laboratory of Advanced Design and Manufacture for Vehicle Body, Hunan University, Changsha 410082, China
来源：
Guti Lixue Xuebao/Acta Mechanica Solida Sinica | 2009年 / 30卷 / 01期
关键词：
D O I：
暂无
中图分类号：
学科分类号：
摘要：
18
引用
收藏
页码：70 / 78
相关论文
共 50 条
  • [1] FINITE ELEMENT OPTIMIZATION OF DEEP DRAWING PROCESS FORMING PARAMETERS FOR MAGNESIUM ALLOYS
    Watiti, Victor B.
    Labeas, George N.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 97 - 100
  • [2] Finite Element Optimization of Deep Drawing Process Forming Parameters for Magnesium Alloys
    Victor B. Watiti
    George N. Labeas
    [J]. International Journal of Material Forming, 2010, 3 : 97 - 100
  • [3] Optimum process design in sheet metal forming with finite element analysis
    Huh, Hoon
    Kim, Se-Ho
    [J]. American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 2000, 11 : 555 - 561
  • [4] Finite Element Analysis of Bulging Forming for Sheet Metal with Bottom Compression Drawing Method
    Lin, Qiquan
    Dong, Wenzheng
    Xiao, Hui
    Wang, Zhigang
    [J]. MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 2655 - +
  • [5] Research on sheet metal forming and springback by explicit finite element analysis
    Han, Jian-Bao
    Yun, Zhi-Gang
    [J]. Suxing Gongcheng Xuebao/Journal of Plasticity Engineering, 2003, 10 (04):
  • [6] An assessment of numerical parameters influencing springback in explicit finite element analysis of sheet metal forming process
    Lee, SW
    Yang, DY
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1998, 80-1 : 60 - 67
  • [7] Optimization of the blankholder thickness for sheet metal forming using Finite Element Analysis
    Neher, W
    Weinmann, KJ
    Emblom, WJ
    [J]. TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXIX, 2001, 2001, : 59 - 66
  • [8] Optimization of the structural and process parameters in the sheet metal forming process
    Lee, Jae-Jun
    Park, Gyung-Jin
    [J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2014, 28 (02) : 605 - 619
  • [9] Optimization of the structural and process parameters in the sheet metal forming process
    Jae-Jun Lee
    Gyung-Jin Park
    [J]. Journal of Mechanical Science and Technology, 2014, 28 : 605 - 619
  • [10] Optimum process design in sheet-metal forming with finite element analysis
    Huh, H
    Kim, SH
    [J]. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (04): : 476 - 481
12345