Batch emulsion polymerization of vinyl chloride: Application of experimental design to investigate the effects of operating variables on particle size and particle size distribution

被引:0
|
作者
Pourmehr, Mahdi [1 ]
Navarchian, Amir H. [1 ]
机构
[1] Department of Chemical Engineering, University of Isfahan, Isfahan, Iran
来源
Journal of Applied Polymer Science | 2009年 / 111卷 / 01期
关键词
In this article; the influences of operating variables on the particle size (PS) and particle size distribution (PSD) of emulsion poly(vinyl chloride) in batch reactor were investigated using Taguchi experimental design approach. The variables were temperature (T); water to monomer weight ratio (R); concentrations of initiator ([I]) and emulsifier ([E]); and agitation speed (S). Scanning electron microscope was used; together with image analysis software to determine the PS and PSD. Statistical analysis of results revealed that the PS of emulsion poly(vinyl chloride) strongly depends on emulsifier and initiator concentrations; respectively; whereas the other factors have no significant effects in the range of levels investigated in this study. Except initiator concentration; all factors have important influence on the PSD (significance sequence: S > R > T > [E]). It is implied from the greater influence of agitation speed relative to temperature on PSD that the shear coagulation predominates the Brownian coagulation in this system. The relative optimum condition for a typical paste application was also determined using overall evaluation criteria. © 2008 Wiley Periodicals; Inc;
D O I
暂无
中图分类号
学科分类号
摘要
Journal article (JA)
引用
收藏
页码:338 / 347
相关论文
共 50 条
  • [1] Batch Emulsion Polymerization of Vinyl Chloride: Application of Experimental Design to Investigate the Effects of Operating Variables on Particle Size and Particle Size Distribution
    Pourmehr, Mahdi
    Navarchian, Amir H.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 111 (01) : 338 - 347
  • [2] The effect of oxygen on the kinetics and particle size distribution in vinyl chloride emulsion polymerization
    Kiparissides, C
    Achilias, DS
    Frantzikinakis, CE
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2002, 41 (13) : 3097 - 3109
  • [3] Observer design for particle size distribution in emulsion polymerization
    Edouard, D
    Sheibat-Othman, N
    Hammouri, H
    [J]. AICHE JOURNAL, 2005, 51 (12) : 3167 - 3185
  • [4] Novel operating method for controlling latex particle size distribution in emulsion polymerization of vinyl acetate
    Ohmura, N
    Kitamoto, K
    Yano, T
    Kataoka, K
    [J]. INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2001, 40 (23) : 5177 - 5183
  • [5] A combinatorial approach to evaluation of monomer conversion and particle size distribution in vinyl chloride emulsion polymerization
    Amir Saeid Pakdel
    Mohammad Reza Saeb
    Hossein Abedini
    Hossein Ali Khonakdar
    Regine Boldt
    [J]. Polymer Bulletin, 2014, 71 : 2487 - 2506
  • [6] A combinatorial approach to evaluation of monomer conversion and particle size distribution in vinyl chloride emulsion polymerization
    Pakdel, Amir Saeid
    Saeb, Mohammad Reza
    Abedini, Hossein
    Khonakdar, Hossein Ali
    Boldt, Regine
    [J]. POLYMER BULLETIN, 2014, 71 (10) : 2487 - 2506
  • [7] PARTICLE DISTRIBUTION IN THE EMULSION POLYMERIZATION OF VINYL-CHLORIDE
    TAUER, K
    JAEGER, W
    [J]. CHEMISCHE TECHNIK, 1982, 34 (11): : 612 - 612
  • [8] Modeling of the particle size distribution in emulsion polymerization
    Sood, Ashwini
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (03) : 1403 - 1419
  • [9] Particle size distribution control in emulsion polymerization
    Sood, A
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 92 (05) : 2884 - 2902
  • [10] Batch emulsion polymerization of vinyl chloride: Effect of operating variables on reactor performance
    Alvarez, AE
    Ressia, JA
    Aparicio, LV
    Sarmoria, C
    Valles, EM
    Brandolin, A
    [J]. LATIN AMERICAN APPLIED RESEARCH, 2001, 31 (04) : 317 - 323