Melting and crystallization behaviors of isotactic polypropylene/ acrylonitrile-butadiene rubber blends in the presence and absence of compatibilizers and fillers

被引：0
|
作者：
Joseph, Aju [1 ]
George, Snoopy [2 ]
Joseph, Kuruvilla [1 ]
Thomas, Sabu [2 ]
机构：
[1] St. Berchmans' College, Changanacherry, Kerala, India
[2] School of Chemical Sciences, Mahatma Gandhi University, Kottayam, Kerala 686560, India
来源：
Journal of Applied Polymer Science | 2006年 / 102卷 / 03期
关键词：
The melting and crystallization behaviors of isotactic polypropylene (PP)/acrylonitrile-butadiene rubber (NBR) blends were investigated with differential scanning calorimetry. The samples were scanned at a heating rate of 20°C/min in a nitrogen atmosphere. The effects of blend ratio; compatibilizer; and filler addition on the melting and crystallization characteristics of the blends were analyzed. Analysis showed that blend ratio had a predominant effect on the values of onset of crystallization and crystallization temperature; although the heat of fusion (ΔHf); onset of melting; and melting temperature were unaffected. The presence of compatibilizer in the blend had an appreciable influence on the crystallization behavior. ΔHf; heat of crystallization; and percentage crystallinity of the compatibi-lized blends were higher than those of the uncompatibilized blends. Fillers had little impact on the melting behavior of the blends. The morphology of the blends were analyzed with scanning electron microscopy. Hot-stage polarizing optical microscopy was used to study the spherulitic morphology of PP on the addition of NBR. The addition of a few percentage NBR significantly reduced the average spherulite size of PP in the blend followed by a marginal decrease. Blend ratio had a pronounced impact on the growth rate of PP spherulites. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
下载
收藏
页码：2067 / 2080
相关论文
共 50 条
  • [1] Melting and crystallization behaviors of isotactic polypropylene/acrylonitrile-butadiene rubber blends in the presence and absence of compatibilizers and fillers
    Joseph, Aju
    George, Snoopy
    Joseph, Kuruvilla
    Thomas, Sabu
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (03) : 2067 - 2080
  • [2] Thermal Properties and Morphology of Isotactic Polypropylene/Acrylonitrile-Butadiene Rubber Blends in the Presence and Absence of a Nanoclay
    Razavi-Nouri, Mohammad
    Naderi, Ghasem
    Parvin, Ali
    Ghoreishy, Mir Hamid Reza
    JOURNAL OF APPLIED POLYMER SCIENCE, 2011, 121 (03) : 1365 - 1371
  • [3] Nanomodified fillers in chloroprene-rubber-compatibilized natural rubber/acrylonitrile-butadiene rubber blends
    Thomas, Shaji P.
    Mathew, E. J.
    Marykutty, C. V.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 124 (05) : 4259 - 4267
  • [4] Intercalated montmorillonites as fillers for acrylonitrile-butadiene rubber
    Zaborski, Marian
    Kunert, Anna
    Pietrasik, Joanna
    Szynkowska, Malgorzata Iwona
    Lesniewska, Ewa
    RUBBER CHEMISTRY AND TECHNOLOGY, 2007, 80 (02): : 279 - 295
  • [5] Comparison properties of natural rubber/virgin acrylonitrile-butadiene rubber and natural rubber/recycled acrylonitrile-butadiene rubber blends
    Ahmad, H. S.
    Ismail, H.
    Azura, A. R.
    IRANIAN POLYMER JOURNAL, 2015, 24 (03) : 185 - 195
  • [6] Electron-Beam Irradiation of Blends of Polypropylene with Recycled Acrylonitrile-Butadiene Rubber
    Ismail, H.
    Galpaya, D.
    Ahmad, Z.
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2010, 16 (02): : 141 - 146
  • [7] Swelling and mechanical properties of (acrylonitrile-butadiene rubber)/(hydrogenated acrylonitrile-butadiene rubber) blends with precipitated silica filled in gasohol fuels
    Promchim, Jantaraporn
    Kanking, Sirichai
    Niltui, Piyaporn
    Wimolmala, Ekachai
    Sombatsompop, Narongrit
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 2016, 22 (03): : 239 - 246
  • [8] Isothermal Crystallization and Miscibility of Isotactic Polypropylene/Poly(cis-butadiene) Rubber Blends
    Sun, Hui
    Yu, Bin
    Sheng, Jing
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2010, 49 (02): : 335 - 344
  • [9] Molecular transport of aromatic solvents in isotactic polypropylene/acrylonitrile-co-butadiene rubber blends
    George, S
    Varughese, KT
    Thomas, S
    POLYMER, 2000, 41 (02) : 579 - 594
  • [10] Dielectric and mechanical properties of oolystyrene/acrylonitrile-butadiene rubber blends
    Abd-El-Messieh, SL
    Eid, MAM
    Hussein, AI
    JOURNAL OF APPLIED POLYMER SCIENCE, 2002, 86 (03) : 540 - 552
12345