PREPARATION AND PROPERTIES OF LAURIC ACID/STEARIC ACID/NANOCOMPOSITE PHASE CHANGE MATERIALS

被引：0
|
作者：
Tan Q. [1 ]
Liu H. [1 ]
Zhang M. [1 ]
Yu B. [1 ]
Zhang Y. [1 ]
机构：
[1] College of Urban Construction, Nanjing Technology University, Nanjing
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2024年 / 45卷 / 04期
关键词：
endothermic/ exthermic rate; latent heat; nanomaterials; phase change materials; thermal conductivity; thermal energy storage;
D O I：
10.19912/j.0254-0096.tynxb.2022-1938
中图分类号：
学科分类号：
摘要：
In this paper,lauric acid(LA)and stearic acid(SA)were selected as phase change materials(PCMs),and the binary equilibrium phase diagram of LA/SA was drawn. It is found that when the ratio of LA/SA is 7∶3,the composite PCM reaches the lowest eutectic temperature of 31.2 ℃,which is suitable for building envelope. Nano-copper oxide(nano-CuO)and nano-silicon dioxide(nanoSiO2)were added into the composite PCM as thermal conductivity enhancing materials. The effects of different dispersants,different proportions of nanoparticles and dispersants,and different concentrations of nanoparticles on the stability and uniformity of experimental materials were compared. Based on Fourier transform infrared spectroscopy test(FT-IR),differential scanning calorimetry(DSC), thermal conductivity measurement,and thermal absorption and release process analysis,the thermal properties were characterized and studied. The experimental results show that 0.2%nano-CuO/PCM has good stability,and the latent heat of melting and solidification decreases by 5.91% and 5.44%,respectively,and the thermal conductivity increases by 30.0% compares with that of composite PCM. © 2024 Science Press. All rights reserved.
引用
收藏
页码：532 / 539
页数：7
相关论文
共 18 条
  • [1] HAN L, ZHANG X L, JI J, Et al., Research progress on the influence of nano-additives on phase change materials [J], Journal of energy storage, 55, (2022)
  • [2] ZHOU D, ZHAO C Y, TIAN Y., Review on thermal energy storage with phase change materials(PCMs)in building applications[J], Applied energy, 92, pp. 593-605, (2012)
  • [3] KHAN M I, ASFAND F, AL- GHAMDI S G., Progress in research and development of phase change materials for thermal energy storage in concentrated solar power[J], Applied thermal engineering, 219, (2023)
  • [4] CHEN W P, ZHANG X L, DING J H, Et al., Preparation and cycling performance of capric acid- caprylic acid as cold storage phase change material, Journal of refrigeration, 37, 3, pp. 12-16, (2016)
  • [5] YANG Z Y, DONG J K, JIANG Y Q, Et al., Thermal stability of binary multiple decanoic acid- lauric acid as phase change material, Building science, 31, 2, pp. 60-64, (2015)
  • [6] SARAVANAKUMAR P T, ARUNKUMAR S P, BRAILSON MANSINGH B, Et al., Investigating the effect of thermal cycling on thermal characteristics of the nano-silica based phase changing material(PCM)[J], Materials today:proceedings, 50, pp. 1502-1507, (2022)
  • [7] BASKAR I, CHELLA- PANDIAN M, JEYASUBRAMANIAN K., LA- PA eutectic/nano- SiO2 composite phase change material for thermal energy storage application in buildings[J], Construction and building materials, 338, (2022)
  • [8] LU B H, ZHANG Y X, ZHANG J Y, Et al., Preparation, optimization and thermal characterization of paraffin/nanoFe3O4 composite phase change material for solar thermal energy storage, Journal of energy storage, 46, (2022)
  • [9] TYAGI V V, BUDDHI D., PCM thermal storage in buildings:a state of art[J], Renewable and sustainable energy reviews, 11, 6, pp. 1146-1166, (2007)
  • [10] ZHOU S Q, BAI F, RAZAQPUR G, Et al., Effect of key parameters on the transient thermal performance of a building envelope with Trombe wall containing phase change material, Energy and buildings, 284, (2023)
12