TESTING METHOD FOR WATER ABSORPTION OF STRUCTURAL CONCRETE USING DRILLED HOLE; [ドリル削孔を用いた構造体コンクリートの吸水試験方法の提案]

被引：0

作者：

Nonaka A. ^{[1
]}

Yuasa N. ^{[2
]}

机构：

[1] Dept. of Architecture and Architectural Eng., College of Industrial Technology, Nihon Univ

来源：

Journal of Structural and Construction Engineering | 2023年 / 88卷 / 806期

关键词：

Drilled hole; Drilling method water absorption speed; Non-destructive test; Structural Concrete; Water absorption;

D O I：

10.3130/aijs.88.558

中图分类号：

学科分类号：

摘要：

The authors have studied Figg’s idea of the drilled hole as an in-situ water absorption testing method. This study aimed to propose an in-situ water absorption testing method for cover concrete up to 50mm from the surface, examining factors affecting the testing results. As a result, the test specifications were determined and the in-situ water absorption assessing method using drilled hole was proposed. The effects of material, mix proportion and curing on the testing results were investigated and the standard deviations of the water absorption data under different water-cement ratios and demolding age were shown. © 2023 Architectural Institute of Japan. All rights reserved.

引用

页码：558 / 566

页数：8

共 17 条

[1] 人工ニューラルネットワークを用いたリチウムイオン電池電極の最適メソスケール構造探索
Yamanaka, Takumi
Takagishi, Yoichi
Yamaue, Tatsuya
[J]. R and D: Research and Development Kobe Steel Engineering Reports, 2021, 71 (01): : 41 - 47
[2] Structural performance of reinforced concrete beams with plastic hinge relocation methods; [塑性ヒンジ発生位置を制御した鉄筋コンクリート梁の構造性能]
Watanabe H.
Sugiyama T.
Takahashi T.
Sakai Y.
Wakita T.
Tatsuno S.
Kawamoto S.
[J]. Journal of Structural and Construction Engineering, 2021, 86 (789): : 1519 - 1528
[3] Evaluation of structural performance of concrete filled square steel tubular columns using high-strength materials; [高強度材料を用いたコンクリート充填角形鋼管柱の構造性能評価]
Kubota J.
Takaine Y.
Sawamoto Y.
Kato T.
[J]. Journal of Structural and Construction Engineering, 2021, 86 (783): : 827 - 837
[4] Pullout test of post-installed anchors in low strength concrete with brick chips representing Bangladeshi concrete; [バングラデシュのレンガチップを用いた低強度コンクリートを想定したあと施工アンカーの引き抜き実験]
Wardi S.
Saha N.
Sanada Y.
Takahashi S.
[J]. AIJ Journal of Technology and Design, 2019, 25 (59) : 199 - 204
[5] STRUCTURAL PERFORMANCE OF CONCRETE-FILLED SQUARE STEEL TUBULAR COLUMNS WITH REINFORCED HINGE REGION; [材端部を補強したコンクリート充填角形鋼管柱の構造性能]
Kubota J.
Takaine Y.
Sawamoto Y.
Kato T.
[J]. Journal of Structural and Construction Engineering, 2022, 87 (793): : 328 - 339
[6] Shear strength of src beam-to-column joints with concrete filled square tubular column; [コンクリート充填角形鋼管を用いたＳＲＣ構造における柱梁接合部パネルのせん断耐力]
Kishiki S.
Kibishi Y.
Adachi T.
Sakuta J.
Kiyohara T.
Yamada S.
[J]. Journal of Structural and Construction Engineering, 2020, 85 (774): : 1091 - 1101
[7] Flexural behavior of fly-ash based geopolymer concrete beam and its potential for structural members; [フライアッシュをベースとしたジオポリマーコンクリート梁の曲げ性状と構造部材としての可能性]
Shibayama A.
Nishiyama M.
[J]. 1600, Architectural Institute of Japan (86): : 1202 - 1212
[8] On-foot evacuation model using virtual tessellations network: A proposed method for tsunami evacuation planning; [仮想テセレーションネットワークを用いた徒歩避難モデル津波避難計画のための提案方法]
Mardin R.
Shen Z.
[J]. AIJ Journal of Technology and Design, 2020, 26 (62): : 319 - 324
[9] On the type A portland blast-furnace slag cement concrete due to blended ordinary portland cement and type B portland blast-furnace slag cement; [普通ポルトランドセメントと高炉セメント B 種の混合使用により高炉セメント A 種相当としたコンクリートに関する研究]
Kaneko T.
Okura M.
Masuda Y.
[J]. Kaneko, Tatsuki; Okura, Mahito; Masuda, Yoshihiro, 1600, Architectural Institute of Japan (86): : 674 - 685
[10] Structural performance of composite structure with CLT wall infilled in steel frames using drift-pin with steel plate; [CLT をドリフトピン接合し耐震壁として挿入した鉄骨架構の構造性能]
Kanazawa K.
Isoda H.
Kitamori A.
Usami T.
Araki Y.
[J]. Journal of Structural and Construction Engineering, 2021, 86 (788): : 1430 - 1439

← 1 2 →