Simulation of Small-Break Loss-of-Coolant Accident Using the RELAP5 Code with an Improved Wall Drag Partition Model for Bubbly Flow

The RELAP5 code is a computational tool designed for transient simulations of light water reactor coolant systems under hypothesized accident conditions. The original wall drag partition model in the RELAP5 code has a problem in that the bubble velocity is predicted to be faster than the water velocity in the fully developed flow in a constant-area channel. The wall drag partition model, based on the wetted perimeter concept, proves insufficient for accurately modeling bubbly flows. In this study, the wall drag partition model was modified to account for the physical motion of fluid particles. After that, the modified RELAP5 code was applied to predict the SBLOCA of a full-scale nuclear power plant. Considering the SBLOCA scenario, the behavior change in the loop seal clearing phenomenon was clearly shown in the analysis by the model change. Upon the termination of natural circulation, the loop seals were cleared, allowing the steam trapped within the system to discharge through the break. The modified model was confirmed to have an impact at this time. It mainly affected the timing and shape of the loop seal clearing and delayed the overall progress of the accident. It was observed that the flow rate of the bubbly phase decreased as the modified model accounted for wall friction during dispersed flow in the horizontal section, impacting the two-phase flow behavior at the conclusion of the natural circulation phase. © 2024 by the authors.