Strength of threaded connections additively produced from polymeric materials

被引：0

作者：

Dziubek, Tomasz ^{[1
]}

Budzik, Grzegorz ^{[1
]}

Kawalec, Andrzej ^{[1
]}

Dębski, Mariusz ^{[1
]}

Turek, Pawel ^{[1
]}

Oleksy, Mariusz ^{[2
]}

Paszkiewicz, Andrzej ^{[3
]}

Poliński, Przemyslaw ^{[4
]}

Kochmański, Lukasz ^{[4
]}

Kielbicki, Mateusz ^{[4
]}

Józwik, Jerzy ^{[5
]}

Kuric, Ivan ^{[6
]}

Cebulski, Józef ^{[7
]}

机构：

[1] Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Rzeszow,35-959, Poland

[2] Rzeszow University of Technology, Faculty of Chemistry, Rzeszow,35-959, Poland

[3] Rzeszow University of Technology, Faculty of Electrical and Computer Engineering, Rzeszow,35-959, Poland

[4] Rzeszow University of Technology, Doctoral School of Engineering and Technical Sciences, Rzeszow,35-959, Poland

[5] Faculty of Mechanical Engineering, Lublin University of Technology, Lublin,20-618, Poland

[6] University of Žilina, Faculty of Mechanical Engineering, Department of Automation and Production Systems, Žilina,SK-010 26, Slovakia

[7] University of Rzeszow, Institute of Physics, Rzeszow,35-959, Poland

来源：

Polimery/Polymers | 2022年 / 67卷 / 06期

关键词：

3-D printing - 3D-printing - Acrylic resins - Axial forces - Physical modelling - Printing techniques - Screw strength; tensile stress; shear stress - Strength tests - Structural elements - Threaded connection;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The article presents the results of strength tests of screw-nut threaded connections made of polymeric materials such as: ABS, PLA, PET-G and acrylic resin. In order to make physical models, three 3D printing techniques were used: Fused Deposition Modeling (FDM), Fused Filament Fabrication (FFF), and PolyJet. The tests took into account the stresses caused by the axial force generated when the bolt is screwed into the nut or other structural element. Due to the complexity of the issue, the presented studies are only a starting point for further research. © 2022 Industrial Chemistry Research Institute. All rights reserved.

引用

页码：261 / 270

共 50 条

[1] Strength of threaded connections additively produced from polymeric materials
Dziubek, Tomasz
Budzik, Grzegorz
Kawalec, Andrzej
Debski, Mariusz
Turek, Pawel
Oleksy, Mariusz
Paszkiewicz, Andrzej
Polinski, Przernyslaw
Kochmanski, Lukasz
Kleibicki, Matelln
Jozwik, Jerzy
Kuric, Ivan
Cebulski, Jozef
POLIMERY, 2022, 67 (06) : 261 - 270
[2] Flexural Strength of Micropile Threaded Connections
Montoya-Vargas, Sebastian
Gallant, Aaron
Davids, William G.
GEO-CONGRESS 2022: DEEP FOUNDATIONS, EARTH RETENTION, AND UNDERGROUND CONSTRUCTION, 2022, 332 : 218 - 227
[3] Bending strength of threaded connections for micropiles
Zanuy, Carlos
de la Fuente, Pablo
Pinilla, Manuel
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 78 : 68 - 78
[4] Effect of anaerobic threadlockers on the fatigue strength of threaded connections
Dragoni, E
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 1999, 14 (5-6): : 445 - 455
[5] Effect of anaerobic threadlockers on the fatigue strength of threaded connections
Dragoni, Eugenio
International Journal of Materials and Product Technology, 1999, 14 (5-6): : 445 - 455
[6] Dielectric Breakdown of Additively Manufactured Polymeric Materials
Monzel, W. Jacob
Hoff, Brad W.
Maestas, Sabrina S.
French, David M.
Hayden, Steven C.
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION, 2015, 22 (06) : 3543 - 3549
[7] ANALYSIS OF SOOT PRODUCED FROM THE COMBUSTION OF POLYMERIC MATERIALS
VOORHEES, KJ
FIRE AND POLYMERS II: MATERIALS AND TESTS FOR HAZARD PREVENTION, 1995, 599 : 393 - 406
[8] STRENGTH OF THREADED CONNECTIONS UNDER IMPACT LOADS AT LOW-TEMPERATURES
RESHETOV, DN
RUSSIAN ENGINEERING JOURNAL, 1977, 57 (10): : 3 - 5
[9] PROBLEMS OF ENHANCING THE STRENGTH OF POLYMERIC MATERIALS
GUL, VY
VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1983, 25 (05): : 899 - 913
[10] Modelling the impact strength of polymeric materials
Lushcheikin G.A.
Lushcheikin, G.A., 2017, Smithers Rapra (44) : 24 - 27

← 1 2 3 4 5 →