Thermal properties measurements of renatured gelatin using conventional and temperature modulated differential scanning calorimetry

被引：0
|
作者：
Dai, Chi-An [1 ]
Chen, Yi-Fan [1 ]
Liu, Ming-Wei [2 ]
机构：
[1] Department of Chemical Engineering, Institute of Polymer Science and Engineering, National Taiwan University, Taipei 106, Taiwan
[2] Taiwan Adventist Hospital, Taipei 105, Taiwan
来源：
Journal of Applied Polymer Science | 1600年 / 99卷 / 04期
关键词：
The thermal properties of amorphous gelatin films and gelatin films with renatured structural order were measured by using conventional and temperature modulated differential scanning calorimetry (DSC). Different amounts of gelatin structural order associated with a melting enthalpic change in the DSC measurement were prepared based on different gelatin drying conditions. Two consecutive heating and cooling DSC measurements on the gelatin films showed that there was no change in the glasstransition temperature (Tg) for the amorphous gelatin but there was a decrease in the Tg for the structural gelatin on the second DSC scan. This decrease was attributed to the plasticizing effect from the release of originally hydrogen-bonded water associated with the structural gelatin. In addition; a reversing endotherm observed upon melting of the structural gelatin during a temperature modulated DSC measurement indicated that the transition of bound water to free water occurred as the partial triple-helix gelatin melted. © 2006 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1795 / 1801
相关论文
共 50 条
  • [1] Thermal properties measurements of renatured gelatin using conventional and temperature modulated differential scanning calorimetry
    Dai, CA
    Chen, YF
    Liu, MW
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 99 (04) : 1795 - 1801
  • [2] Measurements of thermal properties of carbon/epoxy and glass/epoxy using modulated temperature differential scanning calorimetry
    Kalogiannakis, G
    Van Hemelrijck, D
    Van Assche, G
    JOURNAL OF COMPOSITE MATERIALS, 2004, 38 (02) : 163 - 175
  • [3] Thermal Properties of PMMA on Silica Using Temperature-Modulated Differential Scanning Calorimetry
    Khatiwada, Bal K.
    Hetayothin, Boonta
    Blum, Frank D.
    MACROMOLECULAR SYMPOSIA, 2013, 327 (01) : 20 - 28
  • [4] Characterization of the thermal properties of microcrystalline cellulose by modulated temperature differential scanning calorimetry
    Picker, KM
    Hoag, SW
    JOURNAL OF PHARMACEUTICAL SCIENCES, 2002, 91 (02) : 342 - 349
  • [5] Thermal memory of polyethylenes analyzed by temperature modulated differential scanning calorimetry
    Amarasinghe, G.
    Chen, F.
    Genovese, A.
    Shanks, R.A.
    Journal of Applied Polymer Science, 2003, 90 (03): : 681 - 692
  • [6] Thermal memory of polyethylenes analyzed by temperature modulated differential scanning calorimetry
    Amarasinghe, G
    Chen, F
    Genovese, A
    Shanks, RA
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 90 (03) : 681 - 692
  • [7] Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry
    Solarski, S
    Ferreira, M
    Devaux, E
    POLYMER, 2005, 46 (25) : 11187 - 11192
  • [8] Thermal Properties of Thermochromic Asphalt Binders by Modulated Differential Scanning Calorimetry
    Hu, Jianying
    Wanasekara, Nandula
    Yu, Xiong
    TRANSPORTATION RESEARCH RECORD, 2014, (2444) : 142 - 150
  • [9] Evaluation of heat capacity measurements by temperature-modulated differential scanning calorimetry
    R. Venkata Krishnan
    K. Nagarajan
    Journal of Thermal Analysis and Calorimetry, 2010, 102 : 1135 - 1140
  • [10] Evaluation of heat capacity measurements by temperature-modulated differential scanning calorimetry
    Krishnan, R. Venkata
    Nagarajan, K.
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2010, 102 (03) : 1135 - 1140
12345