Achieving strength-ductility synergy of ODS-FeCrAl alloys via heterostructured strategy

Oxide dispersion strengthened (ODS)-FeCrAl alloys are candidate structural materials for advanced nuclear reactor applications, which have excellent strength and radiation tolerance but low ductility. In this study, a novel ODS-FeCrAl heterostructured composite, reinforced with FCC-structured ODS-CoCrFeNiMn high-entropy particles, was prepared by using mechanical alloying and spark plasma sintering to achieve the strengthductility synergy. The effect of different reinforcement contents (0, 10, 15 and 20 wt%, designated as RC-0, RC-10, RC-15, and RC-20, respectively) on the microstructure and mechanical properties of the composites was investigated. The results showed that the unreinforced reference alloy, RC-0, consists of BCC-structured ODSFeCrAl matrix and high-density oxides. In the RC-10, RC-15, and RC-20 composites, in addition to the ODSFeCrAl matrix and nanoscale oxides, FCC-structured ODS-CoCrFeNiMn high-entropy reinforcement with ultrafine grain size and FCC transition layer with gradient grain size are observed. As the reinforcement content increases, the thickness of transition region increases. The composites show an increase in ultimate compressive strength and compressive strain with increasing reinforcement content in the following order: 2951 MPa/33.6 %, 3169 MPa/40.0 %, 3290 MPa/43.2 %, and 3489 MPa/48.8 %. And the compressive yield strength exhibits an initial increase and subsequent decrease, i.e. 1523 MPa (RC-0), 1680 MPa (RC-10), 1635 MPa (RC-15), and 1355 MPa (RC-20), respectively. The increase in yield strength is mainly attributed to hetero-deformation induced (HDI) strengthening and reinforcement hardening. The improvement in ductility is mainly attributed to the HDI work hardening and the suppression of microcrack formation and propagation at prior powder boundaries.