Processing and mechanical properties of B4C reinforced Al matrix composites

被引：0
|
作者：
Topcu, I. [1 ]
Gulsoy, H.O. [2 ]
Kadioglu, N. [3 ]
Gulluoglu, A.N. [1 ]
机构：
[1] Metallurgical and Materials Engineering Department, Engineering Faculty, Marmara University, Goztepe, 34722 Istanbul, Turkey
[2] Technical Education Faculty, Marmara University, Goztepe, 34722 Istanbul, Turkey
[3] Division of Mechanics, Civil Engineering Department, Faculty of Civil Engineering, Maslak, 34469 Istanbul, Turkey
来源：
Journal of Alloys and Compounds | 2009年 / 482卷 / 1-2期
关键词：
Aluminum matrix composites are emerging as advance engineering materials due to its high specific strength and stiffness; good wear resistance and high temperature properties. Properties of Al reinforced with Al2O3 and SiC are widely investigated. In the present study; mechanical properties of B4C reinforced Al matrix is investigated due to higher hardness and lower density properties than SiC and Al2O3. The high temperature deformation behavior of 5; 10; 15 and 20 wt% B4C powder having an average particle diameter of about 10 μm aluminum matrix composite sintered at 650 °C was investigated by creep tests at temperatures ranging from 400 to 450 °C and creep resistance of Al alloy is enhanced by the presence of B4C particles. Measurement of impact and hardness properties of composites showed that impact values decrease and hardness values increased with increase in weight fraction of reinforcement. © 2009 Elsevier B.V. All rights reserved;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：516 / 521
相关论文
共 50 条
  • [1] Processing and mechanical properties of B4C reinforced Al matrix composites
    Topcu, I.
    Gulsoy, H. O.
    Kadioglu, N.
    Gulluoglu, A. N.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 482 (1-2) : 516 - 521
  • [2] Tensile properties of 5052 Al matrix composites reinforced with B4C particles
    Lee, KB
    Sim, HS
    Cho, SY
    Kwon, H
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (08): : 2142 - 2147
  • [3] Tensile properties of 5052 Al Matrix composites reinforced with B4C particles
    Kon Bae Lee
    Ho Seop Sim
    Hoon Kwon
    Hoon Kwon
    Soo Yeon Cho
    [J]. Metallurgical and Materials Transactions A, 2001, 32 : 2142 - 2147
  • [4] Mechanical properties and microstructure of Al-matrix composites reinforced with B4C produced by Vortex method
    Ehsani, N.
    Baharvandi, H. R.
    Abdizadeh, H.
    Mazaheri, A.
    [J]. INTERNATIONAL CONFERENCE ON SMART MATERIALS AND NANOTECHNOLOGY IN ENGINEERING, PTS 1-3, 2007, 6423
  • [5] Mechanical properties of Al-Cu/B4C and Al-Mg/B4C metal matrix composites
    Ayvaz, Mehmet
    Cetinel, Hakan
    [J]. Materialpruefung/Materials Testing, 2021, 63 (04): : 350 - 355
  • [6] Mechanical properties of Al-Cu/B4C and Al-Mg/B4C metal matrix composites
    Ayvaz, Mehmet
    Cetinel, Hakan
    [J]. MATERIALS TESTING, 2021, 63 (04) : 350 - 355
  • [7] Microstructure and mechanical properties of micro/nano B4C particle reinforced 6061Al matrix composites
    Liu, Ruifeng
    Wang, Wenxian
    Zhao, Wei
    [J]. Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2021, 38 (10): : 3394 - 3401
  • [8] Microstructure and Mechanical Properties of Ni Matrix B4C Reinforced Functionally Graded Composites
    Caligulu, Ugur
    Durmus, Hulya
    Akkas, Mehmet
    Sahin, Baris
    [J]. SCIENCE OF SINTERING, 2021, 53 (04) : 475 - 484
  • [9] An investigation of the microstructure and mechanical properties of B4C reinforced PM magnesium matrix composites
    Guleryuz, L. F.
    Ozan, S.
    Uzunsoy, D.
    Ipek, R.
    [J]. POWDER METALLURGY AND METAL CERAMICS, 2012, 51 (7-8) : 456 - 462
  • [10] An investigation of the microstructure and mechanical properties of B4C reinforced PM magnesium matrix composites
    L. F. Guleryuz
    S. Ozan
    D. Uzunsoy
    R. Ipek
    [J]. Powder Metallurgy and Metal Ceramics, 2012, 51 : 456 - 462
12345