Design and Test of Positive and Negative Pressure Combination Roller Type Precision Seed-metering Device for Rapeseed

被引：0
|
作者：
Liao Y. [1 ,2 ]
Liu J. [1 ]
Liao Q. [1 ,2 ]
Zheng J. [1 ]
Li T. [1 ]
Jiang S. [1 ]
机构：
[1] College of Engineering, Huazhong Agricultural University, Wuhan
[2] Key Laboratory of Agricultural Equipment in Mid-lower Yangtze River, Ministry of Agriculture and Rural Affairs, Wuhan
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2024年 / 55卷 / 05期
关键词：
positive and negative pressure combination; precision seed-metering device; rapeseed; roller type;
D O I：
10.6041/j.issn.1000-1298.2024.05.006
中图分类号：
学科分类号：
摘要：
Considering at the problem of small particle size and light quality of rapeseed, which makes it difficult to displace individual seeds, a positive and negative pressure combination roller type precision seed-metering device was designed. The working principle of the seed-metering device was clarified, and the force analysis of the seed absorbing, seed carrying and seed discharging links of the seed-metering device was carried out, as well as the analysis of the dragging process of the seed discharging roller on the seed population. The mechanism of preventing dragging accumulation by controlling the height of the seed layer in the seed filling area and the pressure of the seed population was proposed, and a seed filling chamber structure with lateral seed filling and free fall of the dragging seed was designed. The influence of the height of the seed layer and the structure of the seed filling chamber on the performance of the seed filling in the seed filling area of the seed-metering device and the solution of the dragging accumulation of the seed population were investigated by using the discrete element simulation. The simulation results showed that the average kinetic energy of the seed population inside the seed dispenser was increased with the increase of the filling seed layer height, and the average disturbance capacity of the seed population was gradually increased. Under the condition of 50 mm seed filling layer height, the designed anti-drag strip accumulation seed filling chamber reduced the pressure on the seed population at the bottom of the seed filling area, and the phenomenon of population drag strip accumulation did not occur, and the disturbing effect on the seed population in the seed filling area was maintained. Seed metering tests were conducted on the JPS 12 seed-metering device inspection test bench, the test results showed that in the roller speed at 15 ~ 30 r / min, suction seed negative pressure in the range of 1. 0 ~ 1. 2 kPa seed-metering device qualified index could reach more than 90% . The results of the field test showed that the coefficient of variation of plant spacing stability was 4. 4% and the coefficient of variation of seedling number consistency in each row was 8. 14% in the actual field operation of the planter equipped with positive and negative pneumatic pressure combination roller-type small-size seed single-seed precision planter, which met the requirements of precision sowing. © 2024 Chinese Society of Agricultural Machinery. All rights reserved.
引用
收藏
页码：63 / 76
页数：13
相关论文
共 35 条
  • [1] WANG Hanzhong, YIN Yan, Analysis and strategy for oil crop industry in China, Chinese Journal of Oil Crop Sciences, 36, 3, pp. 414-421, (2014)
  • [2] WANG Xingyu, LIAO Qingxi, LIAO Yitao, Et al., Situation and prospect of key technology and equipment in mechanization and intelligentization of rapeseed whole industry chain, Jorunal of Huazhong Agricultural University, 40, 2, pp. 24-44, (2021)
  • [3] LIAO Qingxi, LEI Xiaolong, LIAO Yitao, Et al., Research progress of precision seeding for rapeseed, Transactions of the Chinese Society for Agricultural Machinery, 48, 9, pp. 1-16, (2017)
  • [4] YANG Li, YAN Bingxin, ZHANG Dongxing, Et al., Research progress on precision planting technology of maize, Transactions of the Chinese Society for Agricultural Machinery, 47, 11, pp. 38-48, (2016)
  • [5] ZHAO Yuexia, Study on key technology of mechanical precision meterine device, (2003)
  • [6] YUAN Wensheng, WU Chongyou, JIN Chengqian, Design and experiment on seed-metering device with special cells for cole seed, Transactions of the Chinese Society for Agricultural Machinery, 40, 5, pp. 72-75, (2009)
  • [7] LAI Qinghui, JIA Guangxin, SU Wei, Et al., Design and test of ginseng precision special-hole type seed-metering device with convex hull, Transactions of the Chinese Society for Agricultural Machinery, 51, 7, pp. 60-71, (2020)
  • [8] LAI Qinghui, CAO Xiulong, YU Qingxu, Et al., Design and experiment of precision seeding device for hole-drop planter for Panax notoginseng, Transactions of the Chinese Society for Agricultural Machinery, 50, 1, pp. 85-95, (2019)
  • [9] DING Li, DOU Yufei, WANG Wanzhang, Et al., Design and experiment of seed metering device with combination hole and inner filling for Cyperus esculentus, Transactions of the Chinese Society for Agricultural Machinery, 53, 12, pp. 100-115, (2022)
  • [10] SINGH R C, SINGH G, SARASWAT D C., Optimisation of design and operational parameters of a pneumatic seed metering device for planting of groundnut (Arcahis hypogaes) seeds, Indian Journal of Agricultural Sciences, 77, 1, pp. 40-42, (2007)
1234