A homogenisation-based continuum damage mechanics model for cyclic damage in 3D composites

被引：0

作者：

Ghosh, S. ^{[1
]}

Jain, J.R. ^{[1
]}

机构：

[1] Computational Mechanics Research Laboratory, Department of Mechanical Engineering, Ohio State University, OH, United States

来源：

Aeronautical Journal | 2009年 / 113卷 / 1144期

关键词：

This paper develops a 3D homogenisation based continuum damage mechanics (HCDM) model for fibre-reinforced composites undergoing micromechanical damage under cyclic loading. Micromechanical damage in a representative volume element (RVE) of the material occurs by fibre-matrix interfacial debonding; which is incorporated in the model through a hysteretic bilinear cohesive zone model. The proposed model expresses a damage evolution surface in the strain space in the principal damage co-ordinate system or PDCS. PDCS enables the model to account for the effect of non-proportional load history. The material constitutive law involves a fourth order orthotropic tensor with stiffness characterised as a macroscopic internal variable. Cyclic damage parameters are introduced in the monotonic HCDM model(1) to describe the material degradation due to fatigue. Three dimensional damage in composites is accounted for through functional forms of the fourth order damage tensor in terms of components of macroscopic strain and elastic stiffness tensor. The HCDM model parameters are calibrated from homogenisation of micromechanical solutions of the RVE for a few representative cyclic strain histories. The proposed model is validated by comparing results of the HCDM model with pure micromechanical analysis results followed by homogenisation. Finally; the potential of cyclic HCDM model as a design tool is demonstrated through macro-micro analysis of cyclic damage progression in composite structures;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Journal article (JA)

引用

页码：371 / 383

共 50 条

[1] A homogenisation-based continuum damage mechanics model for cyclic damage in 3D composites
Ghosh, S.
Jain, J. R.
AERONAUTICAL JOURNAL, 2009, 113 (1144): : 371 - 383
[2] Homogenization based 3D continuum damage mechanics model for composites undergoing microstructural debonding
Jain, Jayesh R.
Ghosh, Somnath
Journal of Applied Mechanics, Transactions ASME, 2008, 75 (03): : 031011 - 031011
[3] Homogenization based 3D continuum damage mechanics model for composites undergoing microstructural debonding
Jain, Jayesh R.
Ghosh, Somnath
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, 2008, 75 (03): : 0310111 - 03101115
[4] A Continuum Damage Mechanics Model for the Static and Cyclic Fatigue of Cellular Composites
Diel, Sergej
Huber, Otto
MATERIALS, 2017, 10 (08)
[5] Meshfree Continuum Damage Mechanics Modelling for 3D Orthogonal Woven Composites
Li, L. Y.
Aliabadi, M. H.
Wen, P. H.
ADVANCES IN FRACTURE AND DAMAGE MECHANICS X, 2012, 488-489 : 759 - +
[6] Damage Evolution in Composites with a Homogenization-based Continuum Damage Mechanics Model
Jain, Jayesh R.
Ghosh, Somnath
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2009, 18 (06) : 533 - 568
[7] A CONTINUUM DAMAGE MECHANICS MODEL FOR CYCLIC CREEP FRACTURE
AYARI, ML
SUN, BK
HSU, TR
ENGINEERING FRACTURE MECHANICS, 1994, 47 (02) : 215 - 222
[8] Continuum damage mechanics model for fiber reinforced composites
Isometsa, Juha
Sjolind, Stig-Goran
International Journal of Damage Mechanics, 1999, 8 (01): : 2 - 17
[9] 3D Progressive Damage Modeling for Laminated Composite Based on Crack Band Theory and Continuum Damage Mechanics
Wang, J. T.
Pineda, E. J.
Ranatunga, V.
Smeltzer, S. S.
PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES: THIRTIETH TECHNICAL CONFERENCE, 2015, : 1750 - 1766
[10] CONTINUUM DAMAGE MECHANICS FOR MICROCRACKED COMPOSITES
PERREUX, D
OYTANA, C
COMPOSITES ENGINEERING, 1993, 3 (02): : 115 - 122

← 1 2 3 4 5 →