Coupled simulation of internal flow and primary breakup for liquid sheet of pressure-swirl atomizer

被引:0
|
作者
Xu, Rang-Shu [1 ]
Nian, Shuai-Qi [2 ]
Niu, Ling [1 ]
Xu, Wei [1 ]
Bai, Min-Li [3 ]
机构
[1] School of Power and Energy Engineering, Shenyang Aerospace University, Shenyang 110136, China
[2] Department of Engine Components Experiment, China Gas Turbine Establishment, Jiangyou 621703, China
[3] School of Energy and Power Engineering, Dalian University of Technology, Dalian 116024, China
关键词
Phase interfaces - Computational fluid dynamics - Liquids - Multiphase flow;
D O I
暂无
中图分类号
学科分类号
摘要
In order to predict the injection characteristics more accurately and reveal the influence of atomizer structure on atomization process, the VOF multiphase flow model and large eddy simulation turbulent model were used to carry out the coupled CFD simulation of both internal flow and liquid sheet breakup process of the pressure-swirl atomizer of aeroengine. The clear air/liquid phase interface, instable wave of liquid sheet and primary breakup phenomenon were obtained. The simulation results show that with increasing the supplied fuel flow rate, the breakup pattern of liquid sheet undergoes a change from sinuous wave breakup and rim breakup to perforating breakup. And the change in breakup pattern is mainly due to the larger effect of circumferential disturbance caused by the atomizer structure on the breakup process of liquid sheet, which shortens the breakup length of liquid sheet. The numerically calculated spray cone angle and the breakup length of liquid sheet agree well with both measured values and calculated values by semi-empirical formulas.
引用
收藏
页码:661 / 666
相关论文
共 50 条
  • [1] Primary Liquid Breakup in a Pressure-Swirl Atomizer
    Kushari, A.
    Barman, P.
    INTERNATIONAL JOURNAL OF FLUID MECHANICS RESEARCH, 2008, 35 (04) : 354 - 364
  • [2] Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer
    Ashraf, Ibrahim
    Jog, Milind A.
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2007, 129 (04): : 945 - 953
  • [3] MODELING INTERNAL FLOW AND PRIMARY ATOMIZATION IN A SIMPLEX PRESSURE-SWIRL ATOMIZER
    Ferrando, D.
    Carreres, M.
    Belmar-Gil, M.
    Cervello-Sanz, D.
    Duret, B.
    Reveillon, J.
    Salvador, F. J.
    Demoulin, F. X.
    ATOMIZATION AND SPRAYS, 2023, 33 (03) : 1 - 28
  • [4] MODELING INTERNAL FLOW AND PRIMARY ATOMIZATION IN A SIMPLEX PRESSURE-SWIRL ATOMIZER
    Ferrando D.
    Carreres M.
    Belmar-Gil M.
    Cervelló-Sanz D.
    Duret B.
    Reveillon J.
    Salvador F.J.
    Demoulin F.X.
    Atomization and Sprays, 2023, 32 (03) : 1 - 28
  • [5] Internal flow characteristics in scaled pressure-swirl atomizer
    Maly, Milan
    Sapik, Marcel
    Jedelsky, Jan
    Janackova, Lada
    Jicha, Miroslav
    Slama, Jaroslav
    Wigley, Graham
    EFM17 - EXPERIMENTAL FLUID MECHANICS 2017, 2018, 180
  • [6] On the sheet breakup of direct-injection gasoline pressure-swirl atomizer sprays
    Department of Mechanical Engineering, University College London, United Kingdom
    不详
    Atomiz. Sprays, 2007, 6 (501-528):
  • [7] On the sheet breakup of direct-injection gasoline pressure-swirl atomizer sprays
    Davy, M. H.
    Loustalan, P. W.
    ATOMIZATION AND SPRAYS, 2007, 17 (06) : 501 - 528
  • [8] Turbulent flow simulation of liquid jet emanating from pressure-swirl atomizer
    Chun-Lang Yeh
    Heat and Mass Transfer, 2008, 44
  • [9] Turbulent flow simulation of liquid jet emanating from pressure-swirl atomizer
    Yeh, Chun-Lang
    HEAT AND MASS TRANSFER, 2008, 44 (03) : 275 - 280
  • [10] Breakup of swirling films issued from a pressure-swirl atomizer
    Bang, Boo-Hyoung
    Ahn, Chan-Sol
    Yoon, Sam S.
    Yarin, Alexander L.
    FUEL, 2023, 332