EXPERIMENTAL STUDY ON SEISMIC AND REPLACEABLE PERFORMANCE OF REPLACEABLE ENERGY DISSIPATION BEAMS WITH BOLTED END PLATES

被引：0
|
作者：
Men J.-J. [1 ,2 ]
Zhang Z.-Y. [2 ]
Xiong L.-Q. [2 ,3 ]
Wang J.-C. [2 ]
Fan D.-X. [2 ]
机构：
[1] State Key Laboratory of Green Building in Western China, Xi’an University of Architecture & Technology, Shaanxi, Xi’an
[2] School of Civil Engineering, Xi’an University of Architecture and Technology, Shaanxi, Xi’an
[3] School of Civil Engineering, Chongqing Three Gorges College, Chongqing
来源：
Gongcheng Lixue/Engineering Mechanics | 2023年 / 40卷 / 09期
关键词：
dismountable assembly connection; quasi-static test; RCS hybrid frame; replaceability behavior; replaceable link steel beam;
D O I：
10.6052/j.issn.1000-4750.2022.01.0040
中图分类号：
学科分类号：
摘要：
To study the seismic performance and replaceable capacity of energy dissipation beams with bolted end plates, four replaceable energy dissipation beam specimens were designed and fabricated. The effects of length ratio on seismic performance and replaceable capacity of the replaceable energy dissipation beams were investigated through quasi-static test. The results show that specimens with small length ratio present a shear dominated behavior including web-to-stiffener weld fracture, web buckling and web tear. Whereas the failure features of shear and flexure dominate the behavior of specimens with large length ratio, manifested as flange buckling and end plate-to-flange weld fracture. All tested specimens exhibit stable hysteresis behavior, excellent deformation ability and energy dissipation capacity. In addition, the bearing capacity of replaceable energy dissipation beams is strengthened significantly, and the average value of the overstrength factor is about 1.9. The replaceable energy dissipation beams with bolted end plates can be replaced after the earthquake. Moreover, the energy dissipation beams can be replaced conveniently after the earthquake when the residual angle at the beam end is 0.0020 rad-0.0046 rad. Meanwhile, the main stress development of replaceable beams can be divided into three stages of serviceability, non-essential and mandatory replaceability according to the deformation relationship between the replaceable link beams and the proposed frame structure system. © 2023 Tsinghua University. All rights reserved.
引用
收藏
页码：130 / 141
页数：11
相关论文
共 42 条
  • [1] GB 50011−2010, Code for seismic design of buildings, (2010)
  • [2] LYU Xilin, WU Dayang, ZHOU Ying, State-of-the-art of earthquake resilient structures, Journal of Building Structures, 40, 2, pp. 1-15, (2019)
  • [3] EATHERTON M R, MA X, KRAWINKLER H, Et al., Quasi-static cyclic behavior of controlled rocking steel frames, Journal of Structural Engineering, 140, 11, (2014)
  • [4] CLAYTON P M, BERMAN J W, LOWES L N., Subassembly testing and modeling of self-centering steel plate shear walls [J], Engineering Structures, 56, pp. 1848-1857, (2013)
  • [5] JIANG Ziqin, YANG Xiaofeng, ZHANG Ailin, Et al., Study on static behavior of steel frame structure with lateral resistance energy-consuming device, Journal of Beijing University of Technology, 47, 4, pp. 365-373, (2021)
  • [6] ZHANG Hao, LIAN Ming, SU Mingzhou, Et al., Experimental study on seismic behavior of steel framed-tube structure with end-plate connected replaceable shear links made of low yield point steel, China Civil Engineering Journal, 53, 7, pp. 28-42, (2020)
  • [7] ZHANG H, SU M Z, LIAN M, Et al., Experimental and numerical study on the seismic behavior of high-strength steel framed-tube structures with end-plate-connected replaceable shear links, Engineering Structures, 223, (2020)
  • [8] LIAN M, GUAN B L, CHENG Q Q, Et al., Experimental and numerical study of seismic performance of high-strength steel fabricated framed-tube structures with replaceable shear links [J], Structures, 28, pp. 2714-2732, (2020)
  • [9] JI Xiaodong, WANG Yandong, MA Qifeng, Et al., Experimental study on seismic behavior of replaceable steel coupling beams, Journal of Building Structures, 36, 10, pp. 1-10, (2015)
  • [10] JI X D, WANG T D, MA Q F, Et al., Cyclic behavior of replaceable steel coupling beams, Journal of Structural Engineering, 143, 2, (2017)
12345