Impacts of blending advanced treated water and traditional groundwater supply on lead and copper concentrations and microbial diversity in premise plumbing

被引:0
|
作者
Mishrra, Anushka [1 ,4 ]
Zhang, Lin [1 ]
Junior, Janelle [2 ]
Ling, Fangqiong [1 ]
Blute, Nicole K. [3 ]
Giammar, Daniel E. [1 ]
机构
[1] Washington Univ St Louis, Dept Energy Environm & Chem Engn, St Louis, MO 63112 USA
[2] Los Angeles Dept Water & Power, Los Angeles, CA 90012 USA
[3] Hazen & Sawyer, Los Angeles, CA 90017 USA
[4] Univ Calif Berkeley, Dept Civil & Environm Engn, Berkeley, CA 94720 USA
关键词
Advanced treated water; Lead release; Galvanic corrosion; Lead solder; Copper pipes; Microbial diversity; Water stabilization; Potable reuse; SULFATE MASS-RATIO; DRINKING-WATER; GALVANIC CORROSION; DISTRIBUTION-SYSTEM; SURFACE; CHLORIDE; RELEASE; BACTERIA; ECOLOGY; RO;
D O I
10.1016/j.watres.2024.122726
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In response to stresses on water demands, some regions augment conventional drinking water sources with alternative water supplies such as desalinated seawater and reclaimed wastewater. The advanced treatment of wastewater by reverse osmosis, microfiltration, and advanced oxidation processes can produce high quality water for potable uses. However, if not appropriately stabilized, the resulting water can be corrosive to metalbased distribution pipes and plumbing materials. We conducted long-term premise plumbing pipe loop experiments with copper pipes containing lead solder to test the impact of the introduction of advanced treated water on the water quality. Advanced treated water (ATW) originally at low pH (<7) and low alkalinity (<10 mg/L as CaCO3) was stabilized with a calcite contactor before being blended with baseline ground water (BLW). The effects of percentages of ATW on the release of lead and copper and on the changes in the microbial diversity were monitored. Experiments monitored metal release from pipes receiving (1) only BLW, (2) a series of blends of BLW and ATW that gradually increased from 25 % to 100 % ATW, and (3) an abrupt switch from BLW to 100 % ATW. Introducing 100 % ATW dramatically increased lead release and simultaneously decreased copper release. Pipe scale analysis showed that the introduction of ATW had destabilized sulfate-containing pipe scales, which exposed the copper pipe surface to galvanic corrosion. The dissolution of scale material was associated with a significant decrease in sulfate concentration in the 100 % ATW which was in agreement with theoretical solubility calculations. The impact of blending ATW on microbial diversity was studied via 16S rRNA gene amplicon sequencing. The composition of the microbial communities changed significantly after water was in contact with the copper pipes in experiments with both BLW and ATW. The type of water recirculating in the pipes affected the structure of the microbial community. The results from this study can be useful for water utilities that are considering potable reuse as they develop strategies to mitigate any adverse impacts of water quality changes.
引用
收藏
页数:10
相关论文
empty
未找到相关数据