Compatibilization of PP/PE blends and scraps with royalene: Mechanical properties, SAXS, and WAXS

被引：0
|
作者：
Nedkov, T. [1 ]
Lednický, F. [1 ]
Mihailova, M. [1 ]
机构：
[1] Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic, v. v. i., 162 06 Prague 6, Czech Republic
来源：
Journal of Applied Polymer Science | 2008年 / 109卷 / 01期
关键词：
PP/PE 93/7 model virgin blends and recycled scraps were compatibilized with Royalene (EPDM/PE 65/35 blend) and mechanically tested. No differences in impact and tensile properties between them were found. However; the tensile-impact strength increased almost twice with 10%-compatibilized sample in comparison with uncompatibilized ones. The yield stress of blends containing 10% Royalene decreased to 75-80% of the original value. This effect is in agreement with microhardness measurements; the increase in the compatibilizer content causes softening of the blend. The elongation at break and elongation at yield do not depend on the compatibilizer concentration. The compatibilizer does not influence the degree of crystallinity (WAXS data) of the blends either. Vickers microhardness is in good agreement with Tabor's relationship. The differences between long periods of HDPE in Royalene and LDPE in PP/PE blends (SAXS) proved PE/EPDM interaction. The interaction plays a key role in the toughening of PP/PE blends. © 2008 Wiley Periodicals; Inc;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：226 / 233
相关论文
共 50 条
  • [1] Compatibilization of PP/PE blends and scraps with Royalene: Mechanical properties, SAXS, and WAXS
    Nedkov, T.
    Lednicky, F.
    Mihailova, M.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (01) : 226 - 233
  • [2] Improvement of mechanical properties for PP/PS blends by in situ compatibilization
    Díaz, MF
    Barbosa, SE
    Capiati, NJ
    POLYMER, 2005, 46 (16) : 6096 - 6101
  • [3] MECHANICAL-PROPERTIES AND MORPHOLOGY OF CROSSLINKED PP/PE BLENDS AND PP/PE/PROPYLENE-ETHYLENE COPOLYMER BLENDS
    CHIU, WY
    FANG, SJ
    JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (04) : 1473 - 1489
  • [4] MECHANICAL PROPERTIES AND MORPHOLOGY OF CROSSLINKED PP/PE BLENDS AND PP/PE/PROPYLENE-ETHYLENE COPOLYMER BLENDS.
    Chiu, Wen-Yen
    Fang, Shwu-Jen
    1600, (30):
  • [5] Compatibilization of PE-PS-PVC blends morphology development and mechanical properties
    Inst Natl des Sciences Appliquees de, Lyon, Villeurbanne, France
    Polym Networks Blends, 2 (95-100):
  • [6] Mechanical properties and morphology of ternary PP/EPDM/PE blends
    Tchomakov, KP
    Favis, BD
    Huneault, MA
    Champagne, MF
    Tofan, F
    CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2005, 83 (02): : 300 - 309
  • [7] COMPATIBILIZATION OF PE-PS-PVC BLENDS MORPHOLOGY DEVELOPMENT AND MECHANICAL-PROPERTIES
    CUERQ, B
    TAHA, M
    POLYMER NETWORKS & BLENDS, 1995, 5 (02): : 95 - 100
  • [8] PP/PE blends. IV. Characterization and compatibilization of blends of postconsumer resin with virgin PP and HDPE
    Blom, HP
    Teh, JW
    Rudin, A
    JOURNAL OF APPLIED POLYMER SCIENCE, 1998, 70 (11) : 2081 - 2095
  • [9] Compatibilization of PE/PS and PE/PP blends.: I.: Effect of processing conditions and formulation
    Kallel, T
    Massardier-Nageotte, V
    Jaziri, M
    Gérard, JF
    Elleuch, B
    JOURNAL OF APPLIED POLYMER SCIENCE, 2003, 90 (09) : 2475 - 2484
  • [10] Prediction of the Mechanical Properties of PE/PP Blends Using Artificial Neural Networks
    Yousef, Basem F.
    Mourad, Abdel-Hamid I.
    Hilal-Alnaqbi, Ali
    11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
12345