Research progress and thinking of infrared aero-optical effect (Invited)

被引：1
|
作者：
Xing Z. [1 ]
Chen X. [1 ]
Peng Z. [1 ]
Yang Z. [2 ]
Zhang H. [1 ]
Xing Z. [1 ]
Zhang N. [3 ]
机构：
[1] Tianjin Jinhang Institute of Technical Physics, Tianjin
[2] The Third Military Representative Office in Tianjin of Military Representative Agency in Beijing of the Air Force Equipment Department, Tianjin
[3] Beijing Electro-mechanical Engineering Institute, Beijing
来源：
Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering | 2022年 / 51卷 / 04期
关键词：
Aero-optics; Image correction; Infrared detection; Numerical simulation; Wind tunnel;
D O I：
10.3788/IRLA20220228
中图分类号：
学科分类号：
摘要：
Infrared imaging detection technology is an important means of precision guidance. With the development of missile weapons to supersonic and hypersonic, the working environment of infrared imaging detection devices is worse. The structure safety of infrared windows faces great challenges because of the severe aerodynamic thermal environment in high speed flight. The radiation interference of high-temperature radiation sources such as shock wave and window seriously affects the infrared detection ability. The transmission effect of flow field and window reduces the detection and guidance accuracy. Aero-optical effect is the most essential difference between high-speed infrared detection and traditional infrared detection, and it is also the key factor to determine the feasibility of infrared detection applied to high-speed missiles. This paper mainly introduced the aerodynamic thermal effect, thermal radiation effect, transmission effect and their influence of high-speed infrared imaging detection, expounded the progress of aero-optical effect in mechanism research, test research, numerical simulation and correction technology, and finally gave the thoughts and suggestions on the research of aero-optical effect of high-speed infrared detection. Copyright ©2022 Infrared and Laser Engineering. All rights reserved.
引用
收藏
相关论文
共 113 条
  • [1] Shi Chunjun, Zhang Lianhan, Hong Jiaqi, Et al., Study on thermal properties of sapphire crystal, Journal of Synthetic Crystals, 44, 10, pp. 2652-2657, (2015)
  • [2] Yin Hedong, Experimental measurements of sapphire's elastic modulus with temperature change, pp. 39-40, (2011)
  • [3] Song Yunfei, Yu Guoyang, Yin Hedong, Et al., Temperature dependence of elastic modulus of single crystal sapphire investigated by laser ultrasonic, Acta Physica Sinica, 33, 6, pp. 2652-2657, (2012)
  • [4] Cheng Tianbao, Strength and thermal shock resistance of advanced high-temperature materials, (2016)
  • [5] Klein C A., Flexural strength of infrared-transmitting window materials: bimodal Weibull statistical analysis, Optical Engineering, 50, (2011)
  • [6] Yu Huaizhi, Infrared Optics Materials, (2015)
  • [7] Li Jianhua, Guo Changning, Xu Quan, Et al., Thermal stress analysis for the dome of the infrared air-to-air missile, Structure & Environment Engineering, 39, 2, pp. 46-52, (2012)
  • [8] Liu Feng, Tang Xiaofeng, Study on thermal strength failure criterions for supersonic infrared MgF<sub>2</sub> missile dome, Aerospace Shanghai, 31, 3, pp. 39-42, (2014)
  • [9] Liu Yuanchun, He Yurong, Peng Wengen, Et al., Numerical study on thermal and stress responses of an infrared functional window, CIESC Journal, 62, pp. 123-129, (2011)
  • [10] E Yujia, Wang Tianyu, Gao Ge, Et al., Aerothermal dynamic failure of infrared window in high-speed aircraft, Advances in Mechanics, 48, 1, pp. 148-211, (2018)
12345678910