Effects of configuration parameters of sand sampler on sand collection efficiency

被引：0
|
作者：
Zhao M. [1 ]
Wang J. [1 ,2 ]
Liu H. [1 ]
Chen Z. [1 ]
机构：
[1] College of Mechanical and Electrical Engineering, Inner Mongolia Agricultural University
[2] Department of Control and Mechanical and Electrical Engineering, Inner Mongolia Chemical Engineering Professional College
来源：
Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering | 2010年 / 26卷 / 03期
关键词：
Construction parameter; Efficiency; Sampler; Sand; Sand sampler; Wind erosion; Wind tunnel;
D O I：
10.3969/j.issn.1002-6819.2010.03.024
中图分类号：
学科分类号：
摘要：
By analyzing the research results of scholars overseas and domestic in recent years, the main structural factors which impact sampling efficiency were ascertained. They are the ratio of inlet height to width, the channel length, and material of hop-pocket. According to the sand sampler for performance test requirements, different construction parameter sand samplers were designed and tested in the wind erosion tunnel. The results indicate that the average sampling efficiency to soil particles of 0.15-0.60 mm is higher than intermixed dust and 0.15 mm under 6, 9, 12, 15, 18 m/s wind speed. The sampler is applicable to the acquisition of soil particles with the form of jump movement. The order of structural factors that affect sampling efficiency is the ratio of inlet height to width, the channel length, and material of hop-pocket. And the ratio of inlet height to width is the most remarkably factor. By the variance and range analysis, the optimization structure parameter of the sand sampler is as follows: the ratio of inlet height to width is 0.5, the channel length is 20 cm and the material of hop-pocket is falda. Under this situation, the average sampling efficiency of the sand sampler is 80.91%.
引用
收藏
页码：140 / 145
页数：5
相关论文
共 11 条
  • [1] Li Z., Ni J., Liu X., Sampling efficiency of vertical array sand traps, Sampling Efficiency of Vertical Array Sand Traps, 1, pp. 24-31, (2003)
  • [2] 3, pp. 49-56, (1987)
  • [3] 1, pp. 32-36, (1983)
  • [4] 1, pp. 42-46, (1994)
  • [5] Fu L., Experimental study on influence on sand collection rate on configuration parameter of sand sampler, pp. 1-4, (2007)
  • [6] Wang J., Experimental study on influence on sand collection rate on configuration parameter of hop-pocket sand, pp. 8-9, (2008)
  • [7] pp. 102-104, (2005)
  • [8] (2006)
  • [9] Fan G., Study on design and aerodynamic performance of movable wind erosion tunnel, pp. 41-43, (2005)
  • [10] Dong Z., Sun H., Zhao A., WITSEG sampler: A segmented sand sampler for wind tunnel test, Transactions of the CSAE, 23, 6, pp. 714-720, (2003)
12