Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication

被引：0
|
作者：
机构：
[1] Liu, Hongjun
[2] Liu, Jia
[3] Leu, Ming C.
[4] Landers, Robert
[5] Huang, Tishu
来源：
Liu, H. (hongjun_liu@hotmail.com) | 1600年 / Springer London卷 / 67期
关键词：
Freeze-form extrusion fabrication process extrudes an aqueous ceramic paste of high solids loading by ram extruder to fabricate 3-D ceramic green parts. An appropriate extrusion pressure is necessary to get the desired extrusion velocity; and the extrudate should be keep in the same composition during the extrusion process for fabricating uniform green parts. The ram velocity; die land geometry; and paste property are three main factors influencing paste extrusion process. In this paper; the experiments were carried out to determine the effect of the three factors on the extrusion pressure and liquid content of extrudate. The experimental results show that the ram velocity is a strong factor governing the extrusion pressure profiles and too low ram velocity can result in liquid phase migration. The die land diameter and paste viscosity have obvious impact on paste extrusion process; which is largely consistent to the Benbow-Bridgwater model but sometimes is influenced by liquid phase migration. A further analysis of paste extrusion process indicates that the varying of paste structure in different extrusion stage leads to the experimental phenomenon. The research can help to get better understanding of influence factors in paste extrusion and to give reference of controlling the process in freeze-form extrusion fabrication process. © 2012 Springer-Verlag London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Journal article (JA)
引用
收藏
页码：1 / 4
相关论文
共 17 条
  • [1] Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication
    Hongjun Liu
    Jia Liu
    Ming C. Leu
    Robert Landers
    Tishu Huang
    The International Journal of Advanced Manufacturing Technology, 2013, 67 : 899 - 906
  • [2] Factors influencing paste extrusion pressure and liquid content of extrudate in freeze-form extrusion fabrication
    Liu, Hongjun
    Liu, Jia
    Leu, Ming C.
    Landers, Robert
    Huang, Tishu
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 67 (1-4): : 899 - 906
  • [3] EFFECT OF PASTE PROPERTIES ON EXTRUDATE FREEZING TIME IN FREEZE-FORM EXTRUSION FABRICATION PROCESSES
    Li, Mingyang
    Landers, Robert G.
    Leu, Ming C.
    PROCEEDINGS OF THE ASME 9TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2014, VOL 2, 2014,
  • [4] LIQUID PHASE MIGRATION IN EXTRUSION OF AQUEOUS ALUMINA PASTE FOR FREEZE-FORM EXTRUSION FABRICATION
    Liu, Hongjun
    Leu, Ming C.
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 1861 - 1866
  • [5] Freeze-form extrusion fabrication of ceramic parts
    Huang, Tieshu
    Mason, Michael S.
    Hilmas, Gregory E.
    Leu, Ming C.
    VIRTUAL AND PHYSICAL PROTOTYPING, 2006, 1 (02) : 93 - 100
  • [6] Adaptive Extrusion Force Control of Freeze-Form Extrusion Fabrication Processes
    Zhao, Xiyue
    Landers, Robert G.
    Leu, Ming C.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132 (06):
  • [7] Freeze-form extrusion fabrication of functionally graded materials
    Leu, Ming C.
    Deuser, Bradley K.
    Tang, Lie
    Landers, Robert G.
    Hilmas, Gregory E.
    Watts, Jeremy L.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2012, 61 (01) : 223 - 226
  • [8] ADAPTIVE CONTROL OF FREEZE-FORM EXTRUSION FABRICATION PROCESSES
    Zhao, Xiyue
    Landers, Robert G.
    Leu, Ming C.
    PROCEEDINGS OF THE ASME DYNAMIC SYSTEMS AND CONTROL CONFERENCE 2008, PTS A AND B, 2009, : 597 - 604
  • [9] Modeling and Experimental Study on Freeze-form Extrusion Fabrication of FGMs
    Ma W.
    Li S.
    Yang L.
    Wang X.
    Gu Z.
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2019, 30 (13): : 1600 - 1606
  • [10] Development of Freeze-Form Extrusion Fabrication With Use of Sacrificial Material
    Leu, Ming C.
    Garcia, Diego A.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2014, 136 (06):
12