Path planning and optimization algorithm for fiber placement of S-shaped inlet

被引：0
|
作者：
Shao Z.-X. [1 ]
Fu H.-Y. [1 ]
Han Z.-Y. [1 ]
Liu Y. [1 ]
机构：
[1] School of Mechatronics Engineering, Harbin Institute of Technology
来源：
Yuhang Xuebao/Journal of Astronautics | 2010年 / 31卷 / 03期
关键词：
Fiber placement; Path optimization; Path planning; S-shaped inlet;
D O I：
10.3873/j.issn.1000-1328.2010.03.038
中图分类号：
学科分类号：
摘要：
In order to study the fiber placement path planning and optimization algorithm, based on equivalent placement angle method and isometric offset method analysis, the article proposed a placement path planning algorithm based on tape boundaries and tape tow number calculation method. A placement path calculating method, treating isometric offset of curves in the surface as its core idea, was proposed by combining the algorithms of isometric placement method and equivalent placement angle method in the scope of placement angle designed originally. The proposed algorithm can improve the efficiency of fiber placement equipment. Placement information was analyzed which mainly including tape tow number, tow overlap area, tow gap area, etc. Finally, by applying to the path planning of the S-shaped inlet the analysis results above, this paper proved that the feasibility of path planning and optimization algorithm.
引用
收藏
页码：855 / 861
页数：6
相关论文
共 8 条
  • [1] Enders M., Hopkins P., Developments in the fiber placement process, 36th International SAMPE Symposium, 36, pp. 778-790, (1991)
  • [2] Schueler K., Miller J., Hale R., Approximate geometric methods in application to the modeling of fiber placed composite structures, Journal of Computing and Information Science in Engineering, 4, pp. 251-256, (2004)
  • [3] Tosh M.W., Kelly D.W., Fiber steering for a composite c-beam, Composite Structures, 53, pp. 133-141, (2001)
  • [4] Dang X.-D., Xiao J., Huan D.-J., Implementation on fiber placement parallel equidistant path generation algorithm, Journal of Wuhan University, 10, 5, pp. 613-616, (2007)
  • [5] Shirinzadeha B., Cassidya G., Oetomoa D., Alicib G., Trajectory generation for open-contoured structures in robotic fibre placement, Robotics and Computer-Integrated Manufacturing, pp. 380-394, (2007)
  • [6] Liu Y.-N., Analysis of the imaging characteristics and scanning traces of the 45° rotating scanning mirror, Optics and Precision Engineering, 1, pp. 110-115, (2002)
  • [7] Zang H.-Y., Wang Z.-Q., Gan J.-G., Gan D.-Y., A trajectory planning of a pantograph legged mechanism of walking robot, Optics and Precision Engineering, 3, pp. 37-42, (1992)
  • [8] Chen Z.-Z., Yan G.-Z., Lin L.-M., Cai H., Novel approach to generating optimal smooth trajectory for a manipulator, Optics and Precision Engineering, 3, pp. 242-246, (2001)
1