Experiment and Simulation on Spray Characteristics of Effervescent Atomizer within Bubbly Flow

被引：0
|
作者：
Sun C. [1 ]
Ning Z. [1 ]
Qiao X. [2 ]
Li Y. [1 ]
Lü M. [1 ]
机构：
[1] School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing
[2] Institute of Internal Combustion Engine, Shanghai Jiao Tong University, Shanghai
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery | 2019年 / 50卷 / 10期
关键词：
Bubbly flow; Effervescent atomizer; Simulation; Spray; Visualization;
D O I：
10.6041/j.issn.1000-1298.2019.10.043
中图分类号：
学科分类号：
摘要：
A visual effervescent spray system and a gas-liquid flow simulation model of atomizer interior and spray field were established to investigate spray characteristics of bubbly flow. The results showed that there was a gas-phase expansion on spray surface, and the width of the gas-phase expansion was increased with the increase of liquid mass flow rate and gas-liquid mass ratio, distance between two expansions was decreased with the increase of gas-liquid mass ratio. At the same gas-liquid mass ratio, the spray cone angle was increased with the increase of liquid mass flow rate, and the influence of the liquid mass flow rate became weak at high liquid mass flow rate. The spray penetration distance was increased with the increase of liquid mass flow rate at low gas-liquid mass ratio, while decreased at high gas-liquid mass ratio. When the gas-liquid mass ratio was low, the spray shape was apparently influenced by the gas-liquid mass ratio, and the spray cone angle and penetration distance were increased with the increase of gas-liquid mass ratio. As axial distance of the spray was increased, the droplet collision frequency was decreased and gradually became stable. The influence of gas-liquid mass flow pulsation at atomizer outlet on the droplet axial velocity around the cross section of the atomizer outlet was limited to a very short distance. With the axial distance to the atomizer outlet increased, the distribution range of droplet size was widened, the number of peak droplets was decreased, and the peak size of droplet and droplet size distribution was moved to the direction of large size. With the increase of the axial distance to the atomizer outlet, droplet size in large scale droplet area was increased, the radial range of large scale droplet area was widened. © 2019, Chinese Society of Agricultural Machinery. All right reserved.
引用
下载
收藏
页码：367 / 374and409
相关论文
共 25 条
  • [1] Nasser A., Handbook of Atomization and Sprays: Theory and Application, (2011)
  • [2] Konstantinov D., Marsh R., Bowen P., Et al., Effervescent atomization for industrial energy-technology review, Atomization and Sprays, 10, 6, pp. 525-552, (2010)
  • [3] Sovani S.D., Sojka P.E., Lefebvre A.H., Effervescent atomization, Progress in Energy and Combustion Science, 27, 4, pp. 483-521, (2001)
  • [4] Sun C., Ning Z., Lu M., Et al., Time-frequency characteristics of acoustic signal in gas flowing process of effervescent spray nozzle, Transactions of the Chinese Society for Agricultural Machinery, 46, 1, pp. 315-322, (2015)
  • [5] Whitlow J.D., Lefebvre A.H., Effervescent atomizer operation and spray characteristics, Atomization and Sprays, 3, 2, pp. 137-155, (1993)
  • [6] Wade R.A., Weerts J.M., Spkla P.E., Et al., Effervescent atomization at injection pressure in the MPa range, Atomization and Sprays, 9, 6, pp. 651-667, (1999)
  • [7] Roesler T.C., An experimental study of aerated-liquid atomization, (1988)
  • [8] Roesler T.C., Lefebvre A.H., Photographic studies on aerated-liquid atomization, combustion fundamentals and applications, Proceedings of the Central States Section of the Combustion Institute Meeting, (1988)
  • [9] Chin J.S., Lefebvre A.H., Design procedure for effervescent atomizers, ASME Transactions Journal of Engineering for Gas Turbines and Power, 117, 2, pp. 266-271, (1995)
  • [10] Petersen F.J., Worts O., Schaefer T., Et al., Design and atomization properties for an inside-out type effervescent atomizer, Drug Development and Industrial Pharmacy, 30, 3, pp. 319-326, (2004)
123