Cutting temperature of cemented carbides base self-lubricated tool embedded with solid lubricants

被引：0

作者：

Song W. ^{[1
]}

Deng J. ^{[1
]}

Wu Z. ^{[1
]}

Yan P. ^{[1
]}

Zhang H. ^{[1
]}

机构：

[1] Department of Mechanical Engineering, Shandong University

来源：

Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery | 2010年 / 41卷 / 01期

关键词：

Cutting temperature; Dry machining; Friction and wear property; Self-lubricated tool;

D O I：

10.3969/j.issn.1000-1298.2010.01.039

中图分类号：

学科分类号：

摘要：

Microholes were made on the rake of the cemented carbide tools and MoS2 solid lubricants were embedded into the microholes to form self-lubricated tools (SLT-1). Dry machining tests on hardened steel were carried out with the self-lubricated tool, the tool with microholes on the rake without solid lubricants (SLT-2) and the conventional tool (SLT-3). The variation of cutting temperature for 45# hardened steel cutting with the three cutting tools were tested by the TH5104 thermo tracer. The result shows that the cutting temperature of SLT-1 self-lubricated tool decreased obviously. It deceased 15%~20% than that of SLT-3. And the cutting temperature of SLT-2 decreased 5%~10% than that of SLT-3. Through the analysis of cutting temperature distribution, it was observed that the cutting temperature decreased and the raked face resistance was improved since self-lubricating film on the rake face decreased the shear stress and the contact length between chip and tool.

引用

页码：205 / 210

页数：5

共 14 条

[1] (2005)
[2] Wang X., Green machining technology in metal cutting, Chinese Journal of Mechanical Engineering, 36, 8, pp. 6-14, (2000)
[3] (2003)
[4] Deng J., Ge P., Ai X., Development and perspective of lubricating techniques in metal cutting, Tribology, 23, 6, pp. 546-550, (2003)
[5] Deng J., Cao T., Ai X., Friction reducing mechanisms of Al2O3/TiC/CaF2 self-lubricating ceramic tool in machining processes, Chinese Journal of Mechanical Engineering, 42, 7, pp. 109-113, (2006)
[6] (2000)
[7] Yan F., Lin X., Zhou H., Et al., The wear behaviors and anti-wear mechanism of aluminum based embedded composites, Tribology, 19, 3, pp. 271-274, (1999)
[8] Liu R., Li X., Xiong Y., Et al., Study on nickel base solid self-lubricating materials studded with PTFE, Lubrication Engineering, 6, pp. 55-57, (2005)
[9] Jaydeep K., Ioan N., Efstathios I.M., Sliding wear behavior of PTFE composites, Wear, 252, 5-6, pp. 361-369, (2002)
[10] Broshcheva P.N., Okhlopkova A.A., Yuchyugyavea T.S., The effect of natural zeolitt rock on the tribological behavior of polytetrafluorethylene, Friction and Wear, 22, 1, pp. 58-61, (2001)

← 1 2 →