Corrigendum to Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties [J. Alloy. Compd. 804 (2019) 163–191, (S0925838819315555), (10.1016/j.jallcom.2019.04.255)]

被引：0

作者：

Azarniya, Abolfazl ^{[1
,9
]}

Colera, Xabier Garmendia ^{[2
]}

Mirzaali, Mohammad J. ^{[3
]}

Sovizi, Saeed ^{[1
]}

Bartolomeu, Flavio ^{[4
]}

Weglowski, Marek St ^{[5
]}

Wits, Wessel W. ^{[6
]}

Yap, Chor Yen ^{[7
]}

Ahn, Joseph ^{[8
]}

Miranda, Georgina ^{[4
]}

Silva, Filipe Samuel ^{[4
]}

Hosseini, Hamid Reza Madaah ^{[1
]}

Ramakrishna, Seeram ^{[9
]}

Zadpoor, Amir A. ^{[3
]}

机构：

[1] Materials Science and Engineering Department, Sharif University of Technology, P.O. Box 11155-9466, Azadi Avenue, Tehran, Iran

[2] Centre for Materials and Structures, School of Engineering, University of Liverpool, L69 3GH, United Kingdom

[3] Department of Biomechanical Engineering, Faculty of Mechanical, Maritime, and Materials Engineering, Delft University of Technology (TU Delft), Mekelweg 2, Delft,2628 CD, Netherlands

[4] Center for Micro-Electro Mechanical Systems (CMEMS-UMinho), University of Minho, Campus de Azurém, Guimarães,4800-058, Portugal

[5] Department of the Testing of Materials Weldability and Welded Construction, Lukasiewicz Research Network - Institute of Welding, Bl. Czeslawa 16-18, Gliwice,44-100, Poland

[6] Mechanical & Electrical Engineering, THALES Netherlands, P.O. Box 42, Hengelo,7550 GD, Netherlands

[7] Divergent Technologies Inc, Los Angeles, United States

[8] Hwaseong-si, Korea, Republic of

[9] Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore,117576, Singapore

来源：

Journal of Alloys and Compounds | 2024年

关键词：

D O I：

暂无

中图分类号：

学科分类号：

摘要：

The authors regret that the affiliation of Joseph Ahn was incorrectly listed in the original article. The correct affiliation is: Independent Researcher, Hwaseong-si, South Korea This error has now been corrected in the online version of the article. The authors would like to apologise for any inconvenience caused. © 2024

引用

共 9 条

[1] Additive manufacturing of Ti-6Al-4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties (vol 804, pg 163, 2019)
Azarniya, Abolfazl
Colera, Xabier Garmendia
Mirzaali, Mohammad J.
Sovizi, Saeed
Bartolomeu, Flavio
Weglowski, Marek St
Wits, Wessel W.
Yap, Chor Yen
Ahn, Joseph
Miranda, Georgina
Silva, Filipe Samuel
Hosseini, Hamid Reza Madaah
Ramakrishna, Seeram
Zadpoor, Amir A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1010
[2] Additive manufacturing of Ti-6Al-4V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties
Azarniya, Abolfazl
Colera, Xabier Garmendia
Mirzaali, Mohammad J.
Sovizi, Saeed
Bartolomeu, Flavio
Weglowski, Marek St
Wits, Wessel W.
Yap, Chor Yen
Ahn, Joseph
Miranda, Georgina
Silva, Filipe Samuel
Hosseini, Hamid Reza Madaah
Ramakrishna, Seeram
Zadpoor, Amir A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 804 : 163 - 191
[3] Corrigendum to The structural and mechanical properties of Gd and Nd substituted double layered LaCaMnO7 ceramics [J. Alloy. Compd. 797 (15 August 2019) 1173–1180](S0925838819318717)(10.1016/j.jallcom.2019.05.191)
1600, Elsevier Ltd (865):
[4] Corrigendum to Unusual stress-induced martensite transformation in Ti-6Al-4V alloy enabled by solution treatment in the lower α + β regime [J. Alloy. Compd. 956 (2023) 170330] (Journal of Alloys and Compounds (2023) 956, (S092583882301633X), (10.1016/j.jallcom.2023.170330))
Zhou, Xuefeng
Li, Yulin
Han, Ziru
Liu, Zilin
Liu, Kaiwen
Tu, Yiyou
Fang, Feng
Jiang, Jianqing
Journal of Alloys and Compounds, 2023, 958
[5] Corrigendum to Spark plasma sintering of Co80Ni20 nanopowders synthesized by Polyol process and their magnetic and mechanical properties [J. Alloy. Compd. 615 (2014) S269-S275, (S0925838814000899), (10.1016/j.jallcom.2014.01.058)]
Ouar, Nassima
Bousnina, Mohamed Ali
Schoenstein, Frédéric
Mercone, Silvana
Brinza, Ovidiu
Farhat, Samir
Jouini, Noureddine
Journal of Alloys and Compounds, 1600, 1002
[6] Retraction notice to In-situ laser metal deposition of nitinol and the effect of Ni4Ti3 phase concentration on its pseudoelasticity [J. Alloy. Compd. 970 (2024) 172687] (Journal of Alloys and Compounds (2024) 970, (S0925838823039907), (10.1016/j.jallcom.2023.172687))
Bauri, Rakhohari
Nair, Amal M.
Chakraborty, Rajib
Saha, Partha
Journal of Alloys and Compounds, 2024,
[7] Corrigendum to “The fracture toughness and its prediction model for Ti–5Al–5Mo–5V–1Cr–1Fe titanium alloy with basket-weave microstructure” (J. Alloys Compd. (2015) 632 (748–755) (S0925838815003151) (10.1016/j.jallcom.2015.01.217))
Zeng, Weidong (zengwd@nwpu.edu.cn), 1600, Elsevier Ltd (730):
[8] Microstructure evolution and mechanical properties of multi-layer deposition of Ti-6Al-4V-5Ni alloy developed by μ-plasma-based metal additive manufacturing process
Arya, Pradyumn Kumar
Jain, Neelesh Kumar
Sathiaraj, Dan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (11-12): : 5391 - 5408
[9] Microstructure evolution and mechanical properties of multi-layer deposition of Ti-6Al-4V-5Ni alloy developed by μ-plasma-based metal additive manufacturing process
Pradyumn Kumar Arya
Neelesh Kumar Jain
Dan Sathiaraj
The International Journal of Advanced Manufacturing Technology, 2023, 126 : 5391 - 5408

← 1 →

Corrigendum to Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties [J. Alloy. Compd. 804 (2019) 163–191, (S0925838819315555), (10.1016/j.jallcom.2019.04.255)]

Corrigendum to Additive manufacturing of Ti–6Al–4 V parts through laser metal deposition (LMD): Process, microstructure, and mechanical properties [J. Alloy. Compd. 804 (2019) 163–191, (S0925838819315555), (10.1016/j.jallcom.2019.04.255)]