Numerical simulation of fluid field for high-speed cutting grinding

被引：0
|
作者：
Shen P. [1 ]
Zhao H. [2 ]
Zhang Y. [1 ]
机构：
[1] School of Mechanical Engineering, Southern Yangtze University
[2] Shanghai Shibang Machinery Co., Ltd.
来源：
Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery | 2010年 / 41卷 / 09期
关键词：
Blade; Cutting grinder; Experiment; Fluid field; Impeller; Numerical simulation;
D O I：
10.3969/j.issn.1000-1298.2010.09.012
中图分类号：
学科分类号：
摘要：
Based on the analysis of high-speed cutting principle, the numerical simulation of a flow field within the crushing chamber in pulverizing process was performed by CFD technique, and Fluent software, in which RNG k-ε turbulence model was adopted. The effects of impeller blade shape, blade angle and impeller speed on the flow field were revealed, and the crush velocity, pressure, and shear strain rate were analyzed. The linear relationships between the impeller speed and various parameters were obtained. In case of straight blade impeller with 2° deflection angle the obtained flow field shows the optimal efficiency for cutting crush. The experiments for various materials indicate that the high-speed cutting grinder has the broad prospects with physical adaptability and smashing effect.
引用
收藏
页码：60 / 65
页数：5
相关论文
共 13 条
  • [1] pp. 138-151, (2007)
  • [2] Sharma P., Chakkaravarthi A., Singh V., Et al., Grinding characteristics and batter quality of rice in different wet grinding systems, Journal of Food Engineering, 88, 4, pp. 499-506, (2008)
  • [3] Wan Y., Wu H., Zhang Y., The analysis of the principle and correlative parameters in controlled cutting superfine grinding, The Food Industry, 1, pp. 51-52, (2007)
  • [4] Darelius A., Rasmuson A., van Wachem B., Et al., CFD simulation of the high shear mixing process using kinetic theory of granular flow and frictional stress models, Chemical Engineering Science, 63, 8, pp. 2188-2197, (2008)
  • [5] Barailler F., Heniche M., Tanguy P.A., CFD analysis of a rotor-stator mixer with viscous fluids, Chemical Engineering Science, 61, 9, pp. 2888-2894, (2006)
  • [6] Processor User Guide, (2003)
  • [7] Abom J., High-speed mill for grinding biomass and like material, (1986)
  • [8] Dong L., Johansen S.T., Engh T.A., Flow induced by an impeller in an unbaffled tank-II. Numerical modeling, Chemical Engineering Science, 49, 20, pp. 3511-3518, (1994)
  • [9] Zhao H., Zhang L., Zhang Y., Analysis on the mechanism and structural parameters of high-speed comminution for materials of agricultural products, Guizhou Agricultural Sciences, 36, 4, pp. 181-183, (2008)
  • [10] Kong F., Lu Y., Huang J., Et al., Numerical simulation on flow field of variable-pitch inducers, Transactions of the Chinese Society for Agricultural Machinery, 38, 10, pp. 45-48, (2007)
12