Effect of interface modification on mechanical properties of polypropylene-glass fiber composites

被引：0
|
作者：
Huang Y. [1 ]
Huang W. [1 ]
Hong H. [1 ]
Zhang H. [1 ]
机构：
[1] School of Materials and Energy, Guangdong University of Technology, Guangzhou
来源：
Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica | 2022年 / 39卷 / 07期
关键词：
compatibilizer; glass fiber; interfacial modification; lateral strain; poisson's ratio; polymer modification; polypropylene;
D O I：
10.13801/j.cnki.fhclxb.20210916.006
中图分类号：
学科分类号：
摘要：
The filling modification and blending modification of polymers were important methods for the high performance of general plastics. Interfacial compatibility was a common problem in polymer modification. How to improve the interfacial compatibility of composites and explore the correlation between interfacial compatibility and Poisson's ratio are still important topics in polymer modification. Ternary monomer graft polypropylene (GPP) was prepared by solid phase method and blended with glass fiber and polypropylene to prepare polypropylene/ glass fiber composites. The structure and properties of the composites were characterized by video extensometer, differential scanning calorimetry, scanning electron microscopy, infrared spectroscopy, dynamic rheological test and universal tensile test. The results show that the addition of GPP compatibilizer improve the interfacial strength of polypropylene-glass fiber composites. With the increase of GPP compatibilizer, the storage modulus (G') and loss modulus (G'') are both increasing, and the increase of G' is greater than that of G''. Therefore, the elastic behavior of the composite system is significantly greater than that of the viscous behavior. The mechanical properties of polypropylene-glass fiber composite with 7wt% GPP are the best, which was verified by Cole-Cole curve. The results of infrared spectroscopy and scanning electron microscopy show that the GPP compatibilizer form an interfacial layer with the glass fiber, which improve the interfacial compatibility between the resin and the glass fiber and enhance the stress transfer of the glass fiber in the polypropylene matrix. GPP was used as a modifier to improve the interfacial compatibility of PP-GF composites. As a modifier to improve the interfacial compatibility of PP-GF composites, larger transverse strain and smaller Poisson's ratio are formed during the tensile process, which improve the mechanical properties of the composites. © 2022 Beijing University of Aeronautics and Astronautics (BUAA). All rights reserved.
引用
收藏
页码：3162 / 3172
页数：10
相关论文
共 34 条
  • [1] KHANDELWAL S, RHEE K Y., Recent advances in basalt-fiber-reinforced composites: Tailoring the fiber-matrix interface[J], Composites Part B:Engineering, 192, (2020)
  • [2] XIE Z, WU K, LIU D, Et al., One-step alkyl-modification on boron nitride nanosheets for polypropylene nanocomposites with enhanced thermal conductivity and ultra-low dielectric loss[J], Composites Science and Technology, 208, (2021)
  • [3] AGARWAL J, MOHANTY S, NAYAK SK., Influence of cellulose nanocrystal/sisal fiber on the mechanical, thermal, and morphological performance of polypropylene hybrid composites[J], Polymer Bulletin, 78, 3, pp. 1609-1635, (2020)
  • [4] AGARWAL J, MOHANTY S, NAYAK SK., Valorization of pineapple peel waste and sisal fiber: Study of cellulose nanocrystals on polypropylene nano-composites[J], Journal of Applied Polymer Science, 137, 42, (2020)
  • [5] ALEXANDRESCU L, SNMEZ M, GEORGES-CU M, Et al., Polyamide/Polypropylene/graphite nanocomposites with functional compatibilizers: Morpho-structural and physico-mechanical characterization, Procedia Structural Integrity, 5, pp. 675-682, (2017)
  • [6] SZABO L, IMANISHI S, HIROSE D, Et al., Mussel-inspired design of a carbon fiber-cellulosic polymer interface toward engineered biobased carbon fiber-reinforced composites[J], ACS Omega, 5, 42, pp. 27072-27082, (2020)
  • [7] BORYSIAK S, GRZABKA A, ODALANOW-SKA M, Et al., The effect of chemical modification of wood in ionic liquids on the super-molecular structure and mechanical properties of wood/poly-propylene composites, Cellulose, 25, 8, pp. 4639-4652, (2018)
  • [8] HAJJ EI N, SEIF S, SALIBA K, Recycling of plastic mixture wastes as carrier resin for short glass fiber composites[J], Waste and Biomass Valorization, 11, 5, pp. 2261-2271, (2018)
  • [9] HAJJ EI N, SEIF S, ZGHEIB NK., Recycling of poly(propylene)-based car bumpers as carrier resin for short glass fiber composites[J], Journal of Material Cycles and Waste Management, 23, 1, pp. 288-300, (2020)
  • [10] DONG Y, BHATTACHARYYA D., Effects of clay type, clay/compatibilizer content and matrix viscosity on the mechanical properties of Polypropylene/organoclay nanocomposites[J], Composites Part A: Applied Science and Manufacturing, 39, 7, pp. 1177-1191, (2018)
1234