Microstructure of high manganese steel by laser shock processing

被引：1
|
作者：
Zhang L. [1 ]
Xiong Y. [1 ]
Zhang Y. [1 ]
Liu Y. [1 ]
机构：
[1] School of Material Science and Engineering, Henan University of Science and Technology, Luoyang
来源：
Zhongguo Jiguang/Chinese Journal of Lasers | 2011年 / 38卷 / 06期
关键词：
Fine-grained strengthening; High manganese steel; Laser shock processing; Laser technique; Twin crystal; Work-hardening;
D O I：
10.3788/CJL201138.0603025
中图分类号：
学科分类号：
摘要：
Water toughened high manganese steel is treated by laser shocking, and the micro-structure is analyzed by H-800 transmission electron microscope and JSM-5610LV scanning electron microscope. The results show that the hardness of high manganese steel will increase significantly after laser shock processing (LSP) and hardening will occur. The hardness of the impacted center increases from 219 HV to 486 HV, which rises about 122%. In the LSP, a more severe plastic deformation is undergone on the materials, a large number of dislocations are generated, and thus the dislocation block and the cellular structure of dislocations form. With the deformation increasing, a large number of twins are generated in the structure. So the grain boundaries, phase boundaries and other interfaces are destroyed by twinning and dislocation interaction, and grain refinement forms. Dislocations and twins share the role with the fine grain strengthening, so a substantial increase of the performance is emerged in high manganese steel.
引用
收藏
相关论文
共 18 条
  • [1] Yan W., Fang L., Zheng Z., Work hardening of high manganese steel, Foundry Technology, 29, 11, pp. 1468-1472, (2008)
  • [2] Yun P., Gavriljuk V.G., Berns H., Et al., Surface structure of stainless and hadfield steel after impact, Wear, 260, 10, pp. 687-691, (2006)
  • [3] Filippov M.A., Kodes B.N., Influence of high-pressure shock waves on the fine structure of manganese steel, Phys. Met. Metallogr., 31, 1, pp. 171-175, (1971)
  • [4] Ocana J.L., Morales M., Garcia-Ballesteros J.J., Et al., Laser shock microforming of thin metal sheets, Appl. Surf. Sci., 255, 10, pp. 5633-5636, (2009)
  • [5] Xu Y., Chen Y., Xiong J., Et al., Mechanism of strain-induced nanocrystallization of hadfield steel under high energy impact load, Acta Metallrugica Sinica, 37, 2, pp. 165-170, (2001)
  • [6] Li S., Chen X., Work hardening and wearability of superhigh manganese steel, Journal of Iron and Steel Research, 9, 4, pp. 38-41, (1997)
  • [7] Zhong M., Liu W., Leading areas and hot topics on global laser materials processing research, Chinese J. Lasers, 35, 11, pp. 1653-1659, (2008)
  • [8] Qian Y., Lu J., Ni X., Study of laser-induced plasma shock waves by the probe beam deflection technique, Chin. Opt. Lett., 7, 5, pp. 410-412, (2009)
  • [9] Lu J., Luo K., Feng A., Et al., Micro-structural enhancement mechanism of LY2 aluminum alloy by means of a single laser shock processing, Chinese J. Lasers, 37, 10, pp. 2662-2666, (2010)
  • [10] Wang H., Li X., Sun X., Et al., Study of surface mechanical properties of laser shock processed austenitic steel and Ni-based superalloy, Chinese J. Lasers, A27, 8, pp. 756-760, (2000)
12