Deposition of TiZrV coatings onto inner wall of stainless steel pipe by DC magnetron sputtering

被引：0

作者：

Zhang B. ^{[1
]}

Wang Y. ^{[1
]}

Wei W. ^{[1
]}

Fan L. ^{[1
]}

Wang J. ^{[1
]}

Zhang Y. ^{[1
]}

Li W. ^{[1
]}

机构：

[1] National Synchrotron Radiation Laboratory, University of Science and Technology of China

来源：

Qiangjiguang Yu Lizishu/High Power Laser and Particle Beams | 2010年 / 22卷 / 09期

关键词：

Direct current magnetron sputtering; Non-evaporable getter; Particle accelerator; TiZrV coatings;

D O I：

10.3788/HPLPB20102209.2124

中图分类号：

学科分类号：

摘要：

Titanium-zirconium-vanadium(TiZrV) non-evaporable getter(NEG), which can be fully activated after 24 hours heating at 180°C, has been applied in some particle accelerators owing to its outstanding vacuum performance. In our experiments, TiZrV films were deposited onto the inner wall of stainless steel pipes via DC sputtering using argon gas as the sputtering gas. Witness samples were investigated by scanning electron microscopy(SEM), energy dispersive X-ray spectroscopy(EDS), X-ray photoelectron spectroscopy(XPS) and X-ray diffraction(XRD). The average composition of TiZrV samples deposited under various conditions was Ti 30%, Zr 30%, and V 40%, which is in the "low activation temperature zone". XRD results show that TiZrV films are amorphous and composed of nanocrystalline grains. The maximum secondary electron yields(SEYs) of TiZrV before and after heating treatment are 2.03 and 1.55 respectively, which are lower than those of stainless steel and oxygen free copper.

引用

页码：2124 / 2128

页数：4

共 16 条

[1] Benvenuti C., Cazeneuve J.M., Chiggiato P., Et al., A novel route to extreme vacua: The non-evaporable getter thin film coatings, Vacuum, 53, 1-2, pp. 219-225, (1999)
[2] Boffito C., Ferrario B., della Porta P., Et al., A nonevaporable low temperature activatable getter material, J Vac Sci Technol, 18, 3, pp. 1117-1120, (1981)
[3] Benvenuti C., Chiggiato P., Costa Pinto P., Et al., Vacuum properties of TiZrV non-evaporable getter films, Vacuum, 60, 1-2, pp. 57-65, (2001)
[4] Le Pimpec F., Kirby R.E., King F., Et al., Properties of TiN and TiZrV thin film as a remedy against electron cloud, Nucl Instrum Meth A, 551, 2-3, pp. 187-199, (2005)
[5] Anashin V.V., Collins I.R., Dostovalova R.V., Et al., Comparative study of photodesorption from TiZrV coated and uncoated stainless steel vacuum chambers, Vacuum, 75, 2, pp. 155-159, (2004)
[6] Benvenuti C., Chiggiato P., Cicoira F., Et al., Decreasing surface outgassing by thin film getter coatings, Vacuum, 50, 1-2, pp. 57-63, (1998)
[7] Chiggiato P., Pinto P.C., Ti-Zr-V non-evaporable getter films: From development to large scale production for the Large Hadron Collider, Thin Solid Films, 515, 2, pp. 382-388, (2006)
[8] Hahn M., Kersevan R., Parat I., Status report on the performance of NEG-coated chambers at the ESRF, Proceedings of European Particle Accelerator Conference, pp. 1420-1422, (2006)
[9] Herbeaux C., Behcu N., Filhol J.-M., Vacuum conditioning of the SOLEIL storage ring with extensive use of NEG coating, Proceedings of European Particle Accelerator Conference, pp. 3696-3698, (2008)
[10] Grovenor C.R.M., Hentzell H.T.G., Smith D.A., The development of grain structure during growth of metallic films, Acta Metallurgica, 32, 5, pp. 773-781, (1984)

← 1 2 →