Test method for abrasion resistance of sized yarn under simulated weaving conditions

被引：0
|
作者：
Guo M. [1 ]
Gao W. [1 ]
Zhu B. [1 ]
Liu J. [1 ]
Guo M. [1 ]
机构：
[1] Key Laboratory of Eco-Textiles(Jiangnan University), Ministry of Education, Wuxi
来源：
Fangzhi Xuebao/Journal of Textile Research | 2021年 / 42卷 / 11期
关键词：
Abrasion resistance; Opening stroke; Sized yarn; Swinging angle of reed-base; Weaving; Yarn tension;
D O I：
10.13475/j.fzxb.20201203105
中图分类号：
学科分类号：
摘要：
The existing yarn abrasion resistance tester is unable to obtain accurate results due to the great difference between the testing condition and the weaving state. To improve the abrasion resistance test accuracy of the sized yarn, an new abrasion resistance tester(JN-01 Sizing Abrasion Tester) was designed and constructed, which closely simulate the weaving conditions.The tester involves the let-off mechanism, take-up mechanism, shedding mechanism, beating-up mechanism, and a yarn tension adaptive adjustment mechanism. It is able to maintain a constant yarn tension and load stability during the test. Based on the actual test of the yarn abrasion resistance, the influence of the number of samples on test results was discussed, and a total of 50 sized yarns in 5 groups were determined as test samples. Through testing the abrasion resistance of raw and sized yarns on JN-01 and LFY-109A Yarn Abrasion Tester for three levels of fineness, the stability of JN-01 Sizing Abrasion Tester was verified, which could meet the test requirements. © 2021, Periodical Agency of Journal of Textile Research. All right reserved.
引用
收藏
页码：46 / 50
页数：4
相关论文
共 12 条
  • [1] SOLTANI P, JOHARI M S., A study on siro-, solo-, compact-, and conventional ring-spun yarns: part I: structural and migratory properties of the yarns[J], Journal of The Textile Institute, 103, 6, pp. 622-628, (2012)
  • [2] LI Peiying, GUO Mingrui, GAO Weidong, Reducing yarn hairiness by wetting in ring spinning, Journal of Textile Research, 39, 5, pp. 108-112, (2018)
  • [3] GOKTEPEF, YILMAZ D, GOKTEPEO, A comparison of compact yarn properties produced on different systems[J], Textile Research Journal, 76, 3, pp. 226-234, (2006)
  • [4] ISHTIAQUE S M, RENGASAMY R S, DAS B R., Prediction of strength and weavability of blended spun yarns [J], Fibers and Polymers, 15, 8, pp. 1752-1757, (2014)
  • [5] LU Yuzheng, ZHANG Jianxiang, LIU Jianli, Et al., Sizing effects of foam-sizing and warp pre-wetting combined process, Journal of Textile Research, 35, 12, pp. 47-51, (2014)
  • [6] XIANG Zhong, LIU Yang, QIAN Miao, Et al., Research progress in test methods of friction properties of fiber and its products, Journal of Textile Research, 39, 11, pp. 173-180, (2018)
  • [7] OBAID A A, GILLESPIE J W J., Effects of abrasion on mechanical properties of Kevlar KM2-600 and S glass tows [J], Textile Research Journal, 89, 6, pp. 989-1002, (2018)
  • [8] GUDLIN S I, KOVACEVIC S, DIMITROVSKI K., Analysis of changes in mechanical and deformation properties of yarn by sizing [J], Textile Research Journal, 81, 5, pp. 545-555, (2011)
  • [9] XIE K F, XU Y F, SHEN H, Et al., Study on the wearability and abrasion mechanism of braided harness cord [J], Textile Research Journal, 89, 14, pp. 2961-2969, (2019)
  • [10] ZHANG Zhaoyang, YANG Hongying, LIU Rangtong, Et al., Experimental comparative analysis of different yarn abraders, Journal of Zhongyuan University of Technology, 18, 3, pp. 5-8, (2007)
12