Feasibility study of superconducting cable application in wind power grid connection field

被引：0
|
作者：
Jin H. [1 ]
Yang T. [1 ]
Yang C. [1 ]
Hong W. [1 ]
Wang C. [1 ]
Xin Y. [1 ]
机构：
[1] School of Electrical and Information Engineering, Tianjin University, Tianjin
来源：
Taiyangneng Xuebao/Acta Energiae Solaris Sinica | 2021年 / 42卷 / 10期
关键词：
High temperature superconducting cable; Low voltage ride through; Short circuit; Superconducting fault current limiter; Wind power;
D O I：
10.19912/j.0254-0096.tynxb.2019-1145
中图分类号：
学科分类号：
摘要：
In order to study the feasibility of combining superconducting cable with wind power generation, a large permanent magnet direct drive wind farm, a 35 kV Bi series high temperature superconducting cable and a saturated iron-core high temperature superconductive current limiter model are established in PSCAD/EMTDC. By setting short-circuit faults at different positions in the wind farm, the system consisting of wind farms with or without low-voltage ride-through capability and superconducting cables is simulated, and the quenching characteristics of superconducting cables under transient conditions are obtained. The feasibility of superconducting cable to the wind power integration is discussed through the analysis of superconducting cable in meeting the wind farm's requirement, namely the quick full power delivery from the wind farm to the grid after the transient condition. The results indicate that the application of superconducting cable in the field of wind power generation has the superiority and the feasibility in a certain extend. © 2021, Solar Energy Periodical Office Co., Ltd. All right reserved.
引用
收藏
页码：265 / 274
页数：9
相关论文
共 28 条
  • [1] STEMMLE M, MERSCHEL F, NOE M, Et al., Novel grid concepts for urban area power supply, Physics procedia, 36, pp. 884-889, (2012)
  • [2] STEMMLE M, MERSCHEL F, NOE M, Et al., Ampacity-Installation of advanced superconducting 10 kV system in city center replaces conventional 110 kV cables, 2013 IEEE International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD), (2013)
  • [3] STEMMLE M, MERSCHEL F, NOE M, Et al., Ampacity project-worldwide first superconducting cable and fault current limiter installation in a German city center, 22nd International Conference and Exhibition on Electricity Distribution (CIRED 2013), (2013)
  • [4] CHIKUMOTO N, WATANABE H, IVANOV Y V, Et al., Construction and the circulation test of the 500 m and 1000 m DC superconducting power cables in Ishikari, IEEE transactions on applied superconductivity, 26, 3, pp. 1-4, (2016)
  • [5] YAMAGUCHI S, KOSHIZUKA H, HAYASHI K, Et al., Concept and design of 500 meter and 1000 meter DC superconducting power cables in Ishikari, Japan, IEEE transactions on applied superconductivity, 25, 3, pp. 1-4, (2015)
  • [6] ZHU X., Modeling and control of MW permanent magnet direct-driven wind power system connected to the grid, (2013)
  • [7] ZHANG M, NIU S B, LI Q, Et al., Analysis and simulation of the short-circuit test of Jiuquan wind power base, Power system technology, 38, 4, pp. 903-909, (2014)
  • [8] CHEN Q, LIU W J, ZHOU M Q., Optimization design of noise mode for MW wind turbine, Acta energiae solaris sinica, 40, 6, pp. 1715-1721, (2019)
  • [9] LI S D, DONG H Y, ZHANG R P, Et al., Multi-source coordination and optimazation operation of combined heat and power system considering wind power consumption, Acta energiae solaris sinica, 39, 8, pp. 2217-2225, (2018)
  • [10] XIN Y, REN A L, HONG H, Et al., Superconducting power cable, (2013)
123