Correlation Mechanism Between Pore Structure and Backfill Strength Based on NMR Technology

被引:0
|
作者
Zhang Y. [1 ]
Gan D. [1 ]
Xue Z. [1 ]
Liu Z. [1 ]
Chen X. [2 ]
机构
[1] College of Mining Eng., North China Univ. of Sci. and Technol., Tangshan
[2] School of Civil and Environmental Eng., Univ. of Sci. and Technol. Beijing, Beijing
关键词
backfill; correlation mechanism; NMR; pore structure; UCS;
D O I
10.15961/j.jsuese.202100524
中图分类号
学科分类号
摘要
The backfill formed by the solidification of the filling slurry contains a large number of pores, and the influence of pores on the mechanical properties of the backfill is not clear. In order to explore the correlation mechanism between the pore structure and the uniaxial compressive strength (UCS) of the backfill, sodium dodecyl sulfate (SDS) was used to adjust the pore content of the backfill. Low-field nuclear magnetic resonance (NMR) technology was used to test the transverse relaxation time of the internal pores, the UCS was tested by a press, and the microscopic image of the damaged surface pore structure was obtained by scanning electron microscope (SEM). The pore size distribution was analyzed, and the fractal characteristics of the pore size were studied. The results showed that the total pores in the backfill gradually decrease with the increase of curing age, and the higher the SDS content, the closer the total pores of the sample at 14 and 28 d. The proportion of multi-damaging pores decrease significantly with the increase of the curing age, and it is negatively correlated with the UCS of the sample. The proportions of non-damaging pores, less-damaging pores, and damaging pores change little during each age. When the SDS content is 0.2% of the quality of the cement used, the UCS of the sample is the highest. The number of pores with pore diameters in the range of 5~130 nm has obvious fractal characteristics, while the number of pores with pore sizes outside this range do not have fractal characteristics. The ettringite in the hydration products is clustered, and the clustered ettringite squeezes the pore space due to growth, development, and extension. This is the microscopic reason why the total number of pores and the number of multi-damaging pores decrease with the increase of curing age. The research results can provide theoretical support for a more comprehensive understanding of the strength of the backfill. © 2022 Editorial Department of Journal of Sichuan University. All rights reserved.
引用
收藏
页码:121 / 128
页数:7
相关论文
共 30 条
  • [1] Wentao Lan, Aixiang Wu, Yiming Wang, Experimental study on factors affecting the filling performance of composite condensate expansion materials[J], Advanced Engineering Sciences, 51, 5, pp. 192-198, (2019)
  • [2] Xibing Li, Bing Liu, Review and exploration of current situation of backfill mining in hard rock mines[J], Gold Science and Technology, 26, 4, pp. 492-502, (2018)
  • [3] Xue Gaili, Yilmaz E, Feng Guorui, Et al., Reinforcement effect of polypropylene fiber on dynamic properties of cemented tailings backfill under SHPB impact loading, Construction and Building Materials, 279, (2021)
  • [4] Wentao Lan, Aixiang Wu, Non-newtonian fluid pipeline flow equation and its approximate solution[J], Journal of Harbin Institute of Technology, 52, 12, pp. 140-146, (2020)
  • [5] Zhou Nan, Du Erbao, Zhang Jixiong, Et al., Mechanical properties improvement of sand-based cemented backfill body by adding glass fibers of different lengths and ratios, Construction and Building Materials, 280, 1, (2021)
  • [6] Haruna S, Fall M., Strength development of cemented tailings materials containing polycarboxylate ether-based superplasticizer: Experimental results on the effect of time and temperature[J], Canadian Journal of Civil Engineering, 48, 4, pp. 429-442, (2020)
  • [7] Wentao Wang, Rao Yunzhang, Xiao Chunyu, Et al., Experimental study on the optimal ratio of full-tailings cemented filling slurry[J], Mining Research and Development, 41, 3, pp. 42-45, (2021)
  • [8] Zhang Youzhi, Gan Deqing, Chen Xun, Et al., Experiment of shear thixotropy of cemented tailings filling slurry and its prediction model based on dimensional analysis[J], The Chinese Journal of Nonferrous Metals, 30, 4, pp. 951-959, (2020)
  • [9] Wu Aixiang, Ai Chunming, Wang Yiming, Et al., Test and mechanism analysis on improving rheological property of paste with pumping agent[J], Journal of Central South University (Science and Technology), 47, 8, pp. 2752-2758, (2016)
  • [10] Li Gongcheng, Wang Hongjiang, Wu Aixiang, Et al., Experimental study and mechanism analysis on the effect of pumping agents on the compressive strength of paste slurries[J], Chinese Journal of Engineering, 38, 5, pp. 595-601, (2016)